KAI-29052 Datasheet, PDF (1/31 Pages) ON Semiconductor – Interline CCD Image Sensor

KAI-29052
6576 (H) x 4384 (V)
Interline CCD Image Sensor
Description
The KAI−29052 Image Sensor is a 29 Megapixel CCD in a 35 mm
optical format that provides increased Quantum Efficiency (particularly
for NIR wavelengths) compared to members of the standard 5.5 mm
family.
The sensor shares the same broad dynamic range, excellent imaging
performance, and flexible readout architecture as other members of the
5.5 mm pixel family. However, QE at 820 nm has been approximately
doubled compared to existing devices, enabling enhanced sensitivity
without a corresponding decrease in the Modulation Transfer Function
(MTF) of the device.
The sensor is available with the Sparse Color Filter Pattern, which
provides a 2× improvement in light sensitivity compared to a standard
color Bayer part.
The KAI−29052 is drop-in compatible with the KAI−29050 Image
Sensor, simplifying adoption by camera manufacturers currently
working with the KAI−29050.
Table 1. GENERAL SPECIFICATIONS
Parameter
Typical Value
Architecture
Interline CCD; Progressive Scan
Total Number of Pixels
6644 (H) × 4452 (V)
Number of Effective Pixels
6600 (H) × 4408 (V)
Number of Active Pixels
6576 (H) × 4384 (V)
Pixel Size
5.5 mm (H) × 5.5 mm (V)
Active Image Size
36.17 mm (H) × 24.11 mm (V)
43.47 mm (diag.), 35 mm Optical Format
Aspect Ratio
3:2
Number of Outputs
1, 2, or 4
Charge Capacity
Output Sensitivity
20,000 electrons
35 mV/e^*
Quantum Efficiency
Pan (−AXA, −QXA, −PXA)
R, G, B (−FXA, −QXA)
43%, 12%, 5% (540, 850, 920 nm)
39%, 40%, 37% (620, 540, 480 nm)
Read Noise (f = 40 MHz)
10 electrons rms
Dark Current
Photodiode
VCCD
7 electrons/s
140 electrons/s
Dark Current Doubling Temp.
Photodiode
7°C
VCCD
9°C
Dynamic Range
66 dB
Charge Transfer Efficiency
0.999999
Blooming Suppression
> 300 X
Smear
Estimated –100 dB
Image Lag
< 10 electrons
Maximum Pixel Clock Speed 40 MHz
Maximum Frame Rates
Quad Output
Dual Output
Single Output
4 fps
2 fps
1 fps
Package
72 pin PGA
Cover Glass
AR Coated, 2 Sides
NOTE: All Parameters are specified at T = 40°C unless otherwise noted.
www.onsemi.com
Figure 1. KAI−29052 CCD Image Sensor
Features
• Increased QE, with 2× Improvement at
820 nm
• Bayer Color Pattern, Sparse Color Pattern,
and Monochrome Configurations
• Progressive Scan Readout
• Flexible Readout Architecture
• High Frame Rate
• Low Noise Architecture
• Excellent Smear Performance
• Package Pin Reserved for Device
Identification
Applications
• Industrial Imaging and Inspection
• Medical Imaging
• Security and Surveillance
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
May, 2017 − Rev. 0
Publication Order Number:
KAI−29052/D