KAI-1020 Datasheet, PDF (1/63 Pages) ON Semiconductor – Interline CCD Image Sensor

KAI-1020
1000 (H) x 1000 (V) Interline
CCD Image Sensor
Description
The KAI−1020 Image Sensor is a one megapixel interline CCD with
integrated clock drivers and on-chip correlated double sampling.
The progressive scan architecture and global electronic shutter
provide excellent image quality for full motion video and still image
capture.
The integrated clock drivers allow for easy integration with CMOS
logic timing generators. The sensor features a fast line dump for
high-speed sub-window readout and single (30 fps) or dual (48 fps)
output operation.
Table 1. GENERAL SPECIFICATIONS
Parameter
Architecture
Typical Value
Interline CCD, Progressive Scan
Total Number of Pixels
Number of Effective Pixels
Number of Active Pixels
Number of Outputs
Pixel Size
Active Image Size
1028 (H) × 1008 (V)
1004 (H) × 1004 (V)
1000 (H) × 1000 (V)
1 or 2
7.4 mm (H) × 7.4 mm (V)
7.4 mm (H) × 7.4 mm (V)
10.5 mm (Diagonal)
2/3″ Optical Format
Aspect Ratio
Saturation Signal
Output Sensitivity
Quantum Efficiency
ABA (500 nm)
CBA (620 nm, 540 nm, 460 nm)
FBA (600 nm, 540 nm, 460 nm)
Dark Noise
Dark Current (Typical)
Dynamic Range
Blooming Suppression
Image Lag
Smear
Maximum Data Rate
Frame Rate
Progressive Scan, One Output
Progressive Scan, Dual Outputs
Interlaced Scan, One Output
1:1
40,000 e^−
12 mV/e^−
44%
33%, 39%, 41%
39%, 42%, 44%
50 e^− rms
< 0.5 nA/cm²
58 dB
100 X
< 10 e^−
< 0.03%
40 MHz/Channel (2 Channels)
30 fps
48 fps
49 fps
Integrated Vertical Clock Driver
Integrated Correlated Double Sampling (CDS)
Integrated Electronic Shutter Driver
Package
68 Pin PGA or 64 Pin CLCC
Cover Glass
AR Coated, 2 Sides
NOTE: All Parameters are specified at T = 40°C unless otherwise noted.
www.onsemi.com
Figure 1. KAI−1020 Interline
CCD Image Sensor
Features
• 10-Bits Dynamic Range at 40 MHz
• Large 7.4 mm Square Pixels for High
Sensitivity
• Progressive Scan (Non-Interlaced)
• Integrated Correlated Double Sampling
(CDS) Up to 40 MHz
• Integrated Electronic Shutter Driver
• Reversible HCCD Capable of 40 MHz
Operation All Timing Inputs 0 to 5 V
• Single or Dual Video Output Operation
• Progressive Scan or Interlaced
• Fast Dump Gate for High Speed
Sub-Window Readout
• Anti-Blooming Protection
Applications
• Machine Vision
• Medical
• Scientific
• Surveillance
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
October, 2015 − Rev. 4
Publication Order Number:
KAI−1020/D