KAI-08051 Datasheet, PDF (1/35 Pages) ON Semiconductor – Interline CCD Image Sensor

KAI-08051
3296 (H) x 2472 (V)
Interline CCD Image Sensor
Description
The KAI−08051 Image Sensor is an 8−megapixel CCD in a 4/3”
optical format that provides increased QE, reduced read noise, and
improved color accuracy compared to earlier generation devices in the
TRUESENSE 5.5 micron Interline Transfer CCD family. The sensor
features broad dynamic range, excellent imaging performance, and a
flexible readout architecture that enables use of 1, 2, or 4 outputs. Full
resolution readout is supported at up to 16 frames per second, a Region
of Interest (ROI) mode supports partial readout of the sensor at even
higher frame rates.
The sensor is available with the TRUESENSE Sparse Color Filter
Pattern, which provides a 2x improvement in light sensitivity
compared to a standard color Bayer part.
The sensor shares common pin−out and electrical configurations
with other devices based on the TRUESENSE 5.5 micron Interline
Transfer Platform, allowing a single camera design to support multiple
members of this family.
Table 1. GENERAL SPECIFICATIONS
Parameter
Architecture
Total Number of Pixels
Number of Effective Pixels
Number of Active Pixels
Pixel Size
Active Image Size
Typical Value
Interline CCD; Progressive Scan
3364 (H) x 2520 (V)
3320 (H) x 2496 (V)
3296 (H) x 2472 (V)
5.5 mm (H) x 5.5 mm (V)
18.13 mm (H) x 13.60 mm (V)
22.66 mm (diag), 4/3” optical format
Aspect Ratio
Number of Outputs
Charge Capacity
Output Sensitivity
Quantum Efficiency
Pan (−ABA, −PBA)
R, G, B (−CBA, −PBA)
Read Noise (f = 40 MHz)
Dark Current
Photodiode
VCCD
4:3
1, 2, or 4
20,000 electrons
39 mV/e^−
50%
34%, 41%, 42%
10 e^−
7 electrons/s
100 electrons/s
Dark Current Doubling Temp.
Photodiode
7°C
VCCD
9°C
Dynamic Range
Charge Transfer Efficiency
Blooming Suppression
Smear
Image Lag
Maximum Pixel Clock Speed
Maximum Frame Rates
Quad Output
Dual Output
Single Output
Package
Cover Glass
66 dB
0.999999
> 300 X
−100 dB
< 10 electrons
40 MHz
16 fps
8 fps
4 fps
68 pin PGA
AR coated, 2 Sides or Clear Glass
NOTE: All parameters are specified at T = 40°C unless otherwise noted.
www.onsemi.com
Figure 1. KAI−08051 CCD Image Sensor
Features
• Increased QE, Reduced Read Noise, and
and Improved Color Accuracy
• Bayer Color Pattern, TRUESENSE Sparse
Color Filter Pattern, and Monochrome
Configurations
• Progressive Scan Readout
• Flexible Readout Architecture
• High Frame Rate
• High Sensitivity
• Low Noise Architecture
• Excellent Smear Performance
• Package Pin Reserved for Device
Identification
Applications
• Industrial Imaging
• Medical Imaging
• Security
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
March, 2015 − Rev. 3
Publication Order Number:
KAI−08051/D