FCDN614 Datasheet, PDF (1/4 Pages) ON Semiconductor – 1-Channel ESD Protector

FCDN614-UBM
1-Channel ESD Protector
Functional Description
The FCDN614-UBM provides robust ESD protection for sensitive
parts that may be subjected to electrostatic discharge (ESD). The tiny
form factor and single wirebond requirement enables it to be used in
very confined spaces. The electrical ‘back-to-back Zener’
configuration also provides ESD protection in cases where nodes with
AC signals are present. This device is designed and characterized to
safely dissipate ESD strikes of at least ±8 kV, according to the
MIL-STD-883 (Method 3015) specification for Human Body Model
(HBM) ESD.
Features
• Compact Die Protects from ESD Discharges
• Almost No Conduction at Signal Amplitudes Less than ±4 V
• ESD Protection to over ±8 kV Contact Discharge per MIL_STD_883
International ESD Standard
Applications
• LED Lighting
• Modules
• Interface Circuits
http://onsemi.com
ELECTRICAL SCHEMATIC
Al (Aluminum on Underside)
Bare Silicon on Underside
ORDERING INFORMATION
For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
NOTE: The diagram shows a typical application with an AuSn or Au back metal on the ESD die. The diagram also shows the
polarity convention for the ESD die.
Figure 1. Applications Drawing
© Semiconductor Components Industries, LLC, 2012
1
June, 2012 − Rev. 4
Publication Order Number:
FCDN614−UBM/D