ENA4817A Datasheet, PDF (1/6 Pages) ON Semiconductor – Analog Function Switch

Ordering number : ENA4817A
LC78211, 78212, 78213
CMOS LSI
Analog Function Switch
http://onsemi.com
Applications
Function switching under serial data control in amplifiers, receivers, and other electronic equipment.
Features
 Two sets of eight (or in the LC78213, seven) built-in circuits with three switching configurations available based on
differing internal connections.
 Control according to serial data sent from a microprocessor, and easy connection to 5 V microprocessors.
 Two identical products can be connected to a shared bus due to the provision of a select pin (S).
 A reset pin that turns off all analog switches.
 A ±20 V withstand voltage rating allows these products to provide a wide dynamic range.
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
Maximum input voltage
VDD max
VEE max
VI1
VDD
VEE
DI, CL, CE, S, RES
–0.3 to +20
V
–20 to +0.3
V
–0.3 to +20
V
VI2
L1 to L8, R1 to R8, LCOM1 to LCOM4, RCOM1 to RCOM4
VEE – 0.3 to VDD + 0.3
V
Analog switch potential
difference when on
VON
With the switch on
0.5
V
Allowable power dissipation
Operating temperature range
Storage temperature range
Pd max
Topr
Tstg
Ta ≤ 75°C
100
mW
–30 to +75
C
–40 to +125
C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Package Dimensions
unit : mm
PDIP30 / DIP30SD (400mil)
CASE 646AZ
ORDERING INFORMATION
See detailed ordering and shipping information on page 6 of this data sheet.
Semiconductor Components Industries, LLC, 2013
December, 2013
DIP30SD (400mil)
73096HA (OT)/72994 TH (OT) No.A4817-1/6