EN6235 Datasheet, PDF (1/15 Pages) ON Semiconductor – 1/4-Duty General-Purpose LCD Display Driver

Ordering number : EN6235A
LC75844M
CMOS IC
1/4-Duty General-Purpose
LCD Display Driver
http://onsemi.com
Overview
The LC75844M is a 1/4 duty general-purpose LCD driver that can be used for frequency display in electronic tuners
under the control of a microcontroller. The LC75844M can drive an LCD with up to 88 segments directly. The
LC75844M can also control up to 4 general-purpose output ports. Since the LC75844M uses separate power supply
systems for the LCD drive block and the logic block, the LCD driver block power-supply voltage can be set to any
voltage in the range 2.7 to 6.0 volts, regardless of the logic block power-supply voltage.
Application
• Car, Home frequency display
Features
• Support for 1/4 duty 1/2 bias or 1/4 duty 1/3 bias drive of up to 88 segments under serial data control.
• Serial data input supports CCB format communication with the system controller.
• Serial data control of the power-saving mode based backup function and all the segments forced off function
• Serial data control of switching between the segment output port and the general-purpose output port functions
• High generality, since display data is displayed directly without decoder intervention.
• Independent VLCD for the LCD driver block (VLCD can be set to any voltage in the range 2.7 to 6.0 volts,
regardless of the logic block power-supply voltage.)
• The INH pin can force the display to the off state.
• RC oscillator circuit
• CCB is ON Semiconductor® ’s original format. All addresses are managed
by ON Semiconductor® for this format.
• CCB is a registered trademark of Semiconductor Components Industries, LLC.
Semiconductor Components Industries, LLC, 2013
July, 2013
80608HKIM B8-8317 / 92299TH(OT) No.6235-1/15