EMI2180 Datasheet, PDF (1/7 Pages) ON Semiconductor – Common Mode Filter with ESD Protection

EMI2180
Common Mode Filter with
ESD Protection
Functional Description
The EMI2180 is an industry first Common Mode Filter tuned to
MHL speed (CMF) with integrated ESD protection. Differential
signaling I/Os can now have both common mode filtering and ESD
protection in one package, instead of using separate devices for each
function. In addition, traditional common mode chokes are
coil−based, while the EMI2180 is silicon−based. This enables the
EMI2180 to have a smaller footprint and profile. The EMI2180
protects against ESD pulses up to ±15 kV contact per the
IEC61000−4−2 standard.
The EMI2180 is particularly well−suited for protecting systems
using high−speed differential ports such as MHL, MHL to USB
interface corresponding ports in removable storage, digital
camcorders, DVD−RW drives; and other applications where ESD
protection are required in a small footprint package.
The EMI2180 is available in a RoHS−compliant, WDFN-8 package.
Features
• Single Integrated Package for Common Mode Filter (CMF) and ESD
Protection for MHL High Speed Data Lines
• High Differential Mode Bandwidth Cutoff Frequency for Best Signal
Integrity
• Low Profile with Small Footprint in WDFN6 1.6 x 2.0 mm Package
• Provides ESD Protection to IEC61000−4−2 Level 4, ±15 kV Contact
Discharge
• Low Channel Input Capacitance
• These Devices are Pb−Free and are RoHS Compliant
Applications
• I/O Ports, Display, MHL in Mobile Phones, Wireless Handsets and
Cameras
• MHL to USB Interface
• High−Speed Differential Data Lines
1
6
2
5
4
http://onsemi.com
6
1
WDFN6
CASE 511BV
MARKING
DIAGRAM
1
2M MG
G
2M = Specific Device Code
M = Date Code
G = Pb−Free Package
(*Note: Microdot may be in either location)
PIN CONNECTIONS
In 1+ 1
In 1− ₂
NC ₃
GND
PAD
(Top View)
6 Out 1+
5 Out 1−
4 VCC
ORDERING INFORMATION
Device
Package
Shipping^†
EMI2180MTTBG WDFN6
(Pb−Free)
3000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Figure 1. EMI2180 Electrical Schematic
© Semiconductor Components Industries, LLC, 2014
1
April, 2014 − Rev. 2
Publication Order Number:
EMI2180/D