EFC6602R Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – Lithium-ion battery charging and discharging switch

EFC6602R
Power MOSFET
for 1-Cell Lithium-ion Battery Protection
12 V, 5.9 mΩ, 18 A, Dual N-Channel
This Power MOSFET features a low on-state resistance. This device is
suitable for applications such as power switches of portable machines. Best
suited for 1-cell lithium-ion battery applications.
Features
 2.5 V drive
 2 kV ESD HBM
 Common-Drain type
 ESD Diode-Protected Gate
 Pb-Free, Halogen Free and RoHS compliance
Typical Applications
1-Cell Lithium-ion Battery Charging and Discharging Switch
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS at Ta = 25C (Note 1)
Parameter
Symbol
Value
Unit
Source to Source Voltage
Gate to Source Voltage
Source Current (DC)
Source Current (Pulse)
PW  10 s, duty cycle  1%
Total Dissipation (Note 2)
VSSS
VGSS
IS
ISP
PT
12
V
12
V
18
A
60
A
2.0 W
Junction Temperature
Tj
150 C
Storage Temperature
Tstg
55 to +150 C
Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage
the device. If any of these limits are exceeded, device functionality should not
be assumed, damage may occur and reliability may be affected.
THERMAL RESISTANCE RATINGS
Parameter
Symbol
Value
Unit
Junction to Ambient (Note 2)
R_JA
62.5
Note 2 : Surface mounted on ceramic substrate (5000 mm²  0.8 mm).
C/W
www.onsemi.com
VSSS
12 V
RSS(on) Max
5.9 mΩ @ 4.5 V
6.3 mΩ @ 4.0 V
6.5 mΩ @ 3.8 V
8.2 mΩ @ 3.1 V
11 mΩ @ 2.5 V
IS _Max
18 A
ELECTRICAL CONNECTION
N-Channel
4, 6
Rg
5
Rg
2
1 : Source1
2 : Gate1
3 : Source1
4 : Source2
5 : Gate2
6 : Source2
Rg=200Ω
1, 3
MARKING
WLCSP6 1.81x2.70 /
EFCP2718-6CE-020
MB
LOT No.
ORDERING INFORMATION
See detailed ordering and shipping
information on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
September 2016 - Rev. 2
Publication Order Number :
EFC6602R/D