EEF-UE0G221R Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors

SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors)
Surface Mount Type
Series: _{CS, CT, CX (High Voltage Products)}
■ Features
● High voltage. (10 V to 25 V)
● Low profile (1.1 mm, 1.4 mm, 1.9 mm height)
● High ripple current (3.2 Ar.m.s.)
● RoHS directive compliant
■ Specifications
Series & Size Code
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
DC Leakage Current
tan d
Surge Voltage
Endurance
Moisture resistance
CS
CT
CX
–40 °C to +105 °C
10 V.DC to 25 V.DC
10 μF to 47 μF
22 μF to 68 μF
15 μF to 100 μF
±20 % (120 Hz / + 20 °C)
I < 0.3 CV (μA) 2minutes
< 0.06 (120 Hz/+20 °C)
Rated Working Voltage × 1.25 [10 V.DC to 16 V.DC], × 1.15 [20 V.DC to 25 V.DC](15 °C to 35 °C)
After applying rated working voltage for 2000 hours at 105 °C±2 °C, and then being stabilized at +20 °C,
capacitor shall meet the following limits.
Capacitance change
±20% of initial measured value
tan d
< 200 % of initial specified value
DC leakage current
< Initial specified value
After storing for 500 hours at 60 °C, 90 %
Capacitance change of initial
measurd value
10 V.DC to 25 V.DC
+60, –20 %
tan d
< 200 % of initial specified value
DC leakage current
< Initial specified value
■ Marking
Cap.
Polarity bar (Positive)
■ Dimensions in mm(not to scale)
(Unit : mm)
–
+
P
P
L
W1
Lot No. W.V. code
Series &
Size Code
L±0.2 W1±0.2 W2±0.1
H
P±0.3
CS
7.3
4.3
2.4 1.1±0.1 1.3
CT
7.3
4.3
2.4 1.4±0.1 1.3
CX
7.3
4.3
2.4 1.9±0.2 1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Jul. 2014
– EEF-2 –