CS8183_09 Datasheet, PDF (1/8 Pages) ON Semiconductor – Dual Micropower 200 mA Low Dropout Tracking Regulator/Line Driver

CS8183
Dual Micropower 200 mA
Low Dropout Tracking
Regulator/Line Driver
The CS8183 is a dual low dropout tracking regulator designed to
provide adjustable buffered output voltages that closely track
(±10 mV) the reference inputs. The outputs deliver up to 200 mA
while being able to be configured higher, lower or equal to the
reference voltages.
The outputs have been designed to operate over a wide range (2.8 V
to 45 V) while still maintaining excellent DC characteristics. The
CS8183 is protected from reverse battery, short circuit and thermal
runaway conditions. The device also can withstand 45 V load dump
transients and −50 V reverse polarity input voltage transients. This
makes it suitable for use in automotive environments.
The V_REF/ENABLE leads serve two purposes. They are used to
provide the input voltage as a reference for the output and they also
can be pulled low to place the device in sleep mode where it nominally
draws less than 30 mA from the supply.
The two trackers can be combined in parallel doubling the capability
to 400 mA for a single application.
Features
• Two Regulated Outputs 200 mA, ±10 mV Track Worst Case
• Low Dropout (0.35 V typ @ 200 mA)
• Low Quiescent Current
• Independent Thermal Shutdown
• Short Circuit Protection
• Wide Operating Range
• Internally Fused Leads in the SO−20W Package
• These are Pb−Free Devices
http://onsemi.com
20
1
SO−20WB
DWF SUFFIX
CASE 751D
PIN CONNECTIONS AND
MARKING DIAGRAM
1
V_IN1
V_OUT1
NC
NC
GND
GND
NC
NC
V_ADJ1
V_REF/ENABLE1
20
V_OUT2
V_IN2
NC
NC
GND
GND
NC
NC
V_REF/ENABLE2
V_ADJ2
8183 = Specific Device Code
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb−Free Package
ORDERING INFORMATION
Device
Package Shipping^†
CS8183YDWF20G SO−20WB 38 Units/Rail
(Pb−Free)
CS8183YDWFR20G SO−20WB 1000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2008
1
October, 2008 − Rev. 18
Publication Order Number:
CS8183/D