|
CS5253B-1 Datasheet, PDF (1/10 Pages) ON Semiconductor – 3.0 A LDO 5-Pin Adjustable Linear Regulator with Remote Sense Applications | |||
|
CS5253Bâ1
3.0 A LDO 5âPin Adjustable
Linear Regulator with
Remote Sense Applications
This new very low dropout linear regulator reduces total power
dissipation in the application. To achieve very low dropout, the
internal pass transistor is powered separately from the control
circuitry. Furthermore, with the control and power inputs tied together,
this device can be used in single supply configuration and still offer a
better dropout voltage than conventional PNP â NPN based LDO
regulators. In this mode the dropout is determined by the minimum
control voltage.
The CS5253Bâ1 is offered in a fiveâterminal D2PAKâ5 package,
which allows for the implementation of a remoteâsense pin permitting
very accurate regulation of output voltage directly at the load, where it
counts, rather than at the regulator. This remote sensing feature
virtually eliminates output voltage variations due to load changes and
resistive voltage drops. Typical load regulation measured at the sense
pin is less than 1.0 mV for an output voltage of 2.5 V with a load step
of 10 mA to 3.0 A.
The CS5253Bâ1 has a very fast transient loop response which can
be adjusted using a small capacitor on the Adjust pin.
Internal protection circuitry provides for âbustâproofâ operation,
similar to threeâterminal regulators. This circuitry, which includes
overcurrent, short circuit, and overtemperature protection will
self protect the regulator under all fault conditions.
The CS5253Bâ1 is ideal for generating a 2.5 V supply to power
graphics controllers used on VGA cards. Its remote sense and low
value capacitance requirements make this a low cost, high
performance solution. The CS5253Bâ1 is optimized from the
CS5253â1 to allow a lower value of output capacitor to be used at the
expense of a slower transient response.
Features
⢠PbâFree Package is Available*
⢠VOUT Range is 1.25 V to 5.0 V @ 3.0 A
⢠VPOWER Dropout < 0.40 V @ 3.0 A
⢠VCONTROL Dropout < 1.05 V @ 3.0 A
⢠1.0% Trimmed Reference
⢠Fast Transient Response
⢠Remote Voltage Sensing
⢠Thermal Shutdown
⢠Current Limit
⢠Short Circuit Protection
⢠DropâIn Replacement for EZ1582
⢠Backwards Compatible with 3âPin Regulators
⢠Very Low Dropout Reduces Total Power Consumption
*For additional information on our PbâFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2004
1
June, 2004 â Rev. 5
http://onsemi.com
1
5
D2PAKâ5
DP SUFFIX
CASE 936AC
Tab = VOUT
Pin 1. VSENSE
2. Adjust
3. VOUT
4. VCONTROL
5. VPOWER
MARKING DIAGRAM
CS
5253Bâ1
AWLYWW
1
A
= Assembly Location
WL = Wafer Lot
Y
= Year
WW = Work Week
ORDERING INFORMATION
Device
Package Shippingâ
CS5253Bâ1GDP5
D2PAKâ5 50 Units/Rail
CS5253Bâ1GDPR5 D2PAKâ5 750 Tape & Reel
CS5253Bâ1GDPR5G D2PAKâ5 750 Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Publication Order Number:
CS5253Bâ1/D
|
▷ |