|
CS5203-1 Datasheet, PDF (1/10 Pages) Cherry Semiconductor Corporation – 3A Adjustable Linear Regulator | |||
|
CS5203â1
3.0 A Adjustable Linear
Regulator
The CS5203â1 linear regulator provides 3.0 A at adjustable output
voltages with an accuracy of ±1.5 %. The device uses two external
resistors to set the output voltage within a 1.25 V to 5.5 V range.
The regulator is intended for use as a post regulator and
microprocessor supply. The fast loop response and low dropout
voltage make this regulator ideal for applications where low voltage
operation and good transient response are important.
The circuit is designed to operate with dropout voltages less than 1.4 V
at 3.0 A output current. Device protection includes overcurrent and
thermal shutdown.
The CS5203â1 is pin compatible with the LT1085 family of linear
regulators but has lower dropout voltage.
The regulator is available in TOâ220â3 and surface mount D2PAKâ3
packages.
Features
⢠Output Current to 3.0 A
⢠Output Accuracy to ±1.5% Over Temperature
⢠Dropout Voltage (typical) 1.2 V @ 3.0 A
⢠Fast Transient Response
⢠Fault Protection
â Current Limit
â Thermal Shutdown
5.0 V
VIN
VOUT
CS5203â1
Adj
124 W
1.0%
3.3 V @ 3.0 A
10 mF
5.0 V
0.1 mF
5.0 V
200 W
1.0%
22 mF
5.0 V
http://onsemi.com
12 3
123
TOâ220â3
T SUFFIX
CASE 221A
D2PAKâ3
DP SUFFIX
CASE 418AB
Tab = VOUT
Pin 1. Adj
2. VOUT
3. VIN
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 8 of this data sheet.
Figure 1. Applications Diagram
© Semiconductor Components Industries, LLC, 2006
1
September, 2006 â Rev. 8
Publication Order Number:
CS5203â1/D
|
▷ |