CM1453-04CP Datasheet, PDF (1/9 Pages) ON Semiconductor – Praetorian 4-Channel EMI Filter Array with ESD Protection

Praetorian® 4-Channel EMI Filter
Array with ESD Protection
CM1453-04CP
Features
• Four channels of EMI filtering
• ±15kV ESD protection
• (IEC 61000-4-2, contact discharge)
• ±30kV ESD protection (HBM)
• Greater than -40dB of attenuation at 1GHz
• Chip Scale Package (CSP) with 0.40mm pitch
and 0.25mm CSP solder ball which features
extremely low parasitic inductance for optimum
filter and ESD performance
• OptiGuard™ Coating for improved reliability at
assembly
• RoHS compliant
Applications
• LCD and Camera data lines in mobile handsets
• I/O port protection for mobile handsets, notebook
computers, PDAs etc.
• EMI filtering for data ports in cell phones, PDAs
or notebook computers.
• Wireless handsets
• Handheld PCs/PDAs
• LCD and camera modules
Product Description
The CM1453-04CP is a pi-style EMI filter array with
ESD protection, which integrates filters (C-L-C) in
CSP form factor with 0.40mm pitch. Each EMI filter
channel of the CM1453-04CP is implemented as a 3-
pole L-C filter where the component values are
9.5pF-20nH-9.5pF. The roll-off frequency at -6dB
attenuation is 380MHz and can be used in
applications where the data rates are as high as
160Mbps while providing greater than -35dB over the
800MHz to 2.7GHz frequency range. The parts
include ESD diodes on every I/O pin that provide a
high level of protection against electrostatic discharge
(ESD). The ESD protection diodes connected to the
filter ports are designed and characterized to safely
dissipate ESD strikes of ±15kV, beyond the
maximum requirement of the IEC61000-4-2
international standard. Using the MIL-STD-883
(Method 3015) specification for Human Body Model
(HBM) ESD, the pins are protected for contact
discharges at greater than ±30kV.
This device is particularly well suited for wireless
handsets, mobile LCD modules and PDAs because
of its small package format and easy-to-use pin
assignments. In particular, the CM1453-04CP is
ideal for EMI filtering and protecting data and control
lines for the LCD display and camera interface in
mobile handsets.
The CM1453-04CP incorporates OptiGuard™ which
results in improved reliability at assembly. It is
manufactured with a 0.40mm pitch and 0.25mm CSP
solder ball to provide up to 28% board space savings
vs. competing CSP devices with 0.50mm pitch and
0.30mm CSP solder ball.
©2010 SCILLC. All rights reserved.
April 2010 Rev. 2
Publication Order Number:
CM1453-04CP/D