|
CAT810JTBI Datasheet, PDF (1/11 Pages) ON Semiconductor – 3-Pin Microprocessor Power Supply Supervisors | |||
|
CAT803, CAT809, CAT810
3-Pin Microprocessor
Power Supply Supervisors
Description
The CAT803, CAT809, and CAT810 are supervisory circuits that
monitor power supplies in digital systems. The CAT803, CAT809, and
CAT810 are direct replacements for the MAX803, MAX809 and
MAX810 in applications operating over the industrial temperature range.
These devices generate a reset signal, which is asserted while the
power supply voltage is below a preset threshold level and for at least
140 ms after the power supply level has risen above that level. The
underlying floating gate technology, Analog EEPROM used by
ON Semiconductor, makes it possible to offer any custom reset
threshold value. Seven industry standard threshold levels are offered
to support +5.0 V, +3.3 V, +3.0 V and +2.5 V systems.
The CAT803 has an openâdrain RESET output (active LOW). The
CAT803 requires a pullâup resistor on the reset output.
The CAT809 features a pushâpull RESET output (active LOW) and
the CAT810 features a pushâpull RESET output (active HIGH).
Fast transients on the power supply are ignored and the output is
guaranteed to be in the correct state at VCC levels as low as 1.0 V.
The CAT803, CAT809, and CAT810 are available in both the
compact 3âpin SOTâ23 and SCâ70 packages.
Features
⢠Precision Monitoring of
+5.0 V (â5%, â10%, â20%),
+3.3 V (â5%, â10%),
+3.0 V (â10%) and
+2.5 V (â5%) Power Supplies
⢠Offered in Three Output Configurations:
â CAT803: OpenâDrain Active LOW Reset
â CAT809: PushâPull Active LOW Reset
â CAT810: PushâPull Active HIGH Reset
⢠Direct Replacements for the MAX803, MAX809 and MAX810 in
Applications Operating over the Industrial Temperature Range
⢠Reset Valid down to VCC = 1.0 V
⢠6 mA Power Supply Current
⢠Power Supply Transient Immunity
⢠Industrial Temperature Range: â40°C to +85°C
⢠Available in SOTâ23 and SCâ70 Packages
⢠These Devices are PbâFree and are RoHS Compliant
Applications
⢠Computers, Servers, Laptops, Cable Modems
⢠Wireless Communications
⢠Embedded Control Systems
⢠White Goods, Power Meters
⢠Intelligent Instruments
⢠PDAs and Handheld Equipment
http://onsemi.com
SOTâ23
TB SUFFIX
CASE 527AG
SCâ70
SD SUFFIX
CASE 419AB
PIN CONFIGURATION
GND
RESET
(RESET)
1
3
2
(Top View)
3âLead SOT23
3âLead SC70
VCC
CAT803
CAT809
(CAT810)
MARKING DIAGRAMS
XXXMG
G
XXXMG
G
SOTâ23
SCâ70
XXX
M
G
= Specific Device Code
= Month Code
= PbâFree Package
(*Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
© Semiconductor Components Industries, LLC, 2012
1
October, 2012 â Rev. 33
Publication Order Number:
CAT803/D
|
▷ |