English
Language : 

CAT6201_13 Datasheet, PDF (1/10 Pages) ON Semiconductor – 300 mA / 13 V Adjustable CMOS LDO Regulator
CAT6201, CAV6201B
300 mA / 13 V Adjustable
CMOS LDO Regulator
Description
The CAT6201/CAV6201B is a 13 V rated 300 mA CMOS low
dropout regulator that provides fast response time to load current and
line voltage changes in an automotive environment.
CAT6201/CAV6201B features a low RON P−channel pass element
with internal control circuitry which prevents reverse current flow
should the voltage at VOUT exceed VIN as in the case of the car’s
battery voltage accidentally being applied to VOUT.
Thermal protection and current limiting circuitry combine to protect
the pass device against faults and abuse. Current limiting is user
controlled through a single resistor to ground. A fault output (FLT)
provides an alert should an over−current event or thermal shutdown
occur.
CAT6201/CAV6201B comes on−line gracefully even though it may
be driving heavy capacitive loads thanks to built−in soft−start
circuitry. Its output is protected against accidental connection to
voltages greater than VIN and will not conduct current backwards into
its supply.
CAT6201/CAV6201B is available in 8−pad 2 mm x 3 mm TDFN
package.
Features
• Guaranteed 300 mA Continuous Output Current
• Low Dropout Voltage of 250 mV Typical at 300 mA
• Input Voltage Range: 3.3 V to 13.5 V
• User Adjustable Output Voltage
• User Programmable Current Limit
• Fault Output to Indicate Under−voltage, Current Limiting or Thermal
Shutdown has Occurred
• Fault Blanking: 3 ms
• VOUT Withstands Battery Fault Voltages of up to 14 V
• Soft−Start Prevents Current Surges
• Stable with Ceramic Output Capacitor
• ±1.5% Output Voltage Initial Accuracy
• ±2.5% Accuracy Over Temperature
• Thermal Protection
• 8 Pad TDFN Package
• CAV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
TDFN−8
VP2 SUFFIX
CASE 511AK
PIN CONNECTIONS
VIN
1
FLT
EN
BYP
VOUT
VADJ
ILIM
GND
TDFN−8
(Top View)
MARKING DIAGRAMS
HKB
LAA
YM
G
HKB
L
AA
Y
M
G
= CAT6201VP2−GT3 or
= CAV6201BVP2−GT3
= Assembly Location
= Last Two Digits of
= Assembly Lot Number
= Production Year (Last Digit)
= Production Month (1−9, O, N, D)
= Pb−Free Microdot
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
© Semiconductor Components Industries, LLC, 2013
1
December, 2013 − Rev. 3
Publication Order Number:
CAT6201/D