|
CAT3648_14 Datasheet, PDF (1/13 Pages) ON Semiconductor – 4-Channel Ultra High Efficiency LED Driver | |||
|
CAT3648
4-Channel Ultra High
Efficiency LED Driver with
32 Dimming Levels
Description
The CAT3648 is a high efficiency fractional charge pump that can
drive up to four LEDs programmable by a one wire digital interface.
The inclusion of a 1.33x fractional charge pump mode increases
device efficiency by up to 10% over traditional 1.5x charge pumps
with no added external capacitors.
Low noise input ripple is achieved by operating at a constant
switching frequency which allows the use of small external ceramic
capacitors. The multiâfractional charge pump supports a wide range of
input voltages from 2.5 V to 5.5 V.
The EN/DIM logic input functions as a chip enable and a digital
dimming interface for setting the current in all LED channels. The
1âwire pulseâdimming interface supports 32 linear steps from
fullâscale down to zero current.
The device is available in the tiny 16âpad TQFN 3 mm x 3 mm
package with a max height of 0.8 mm.
ON Semiconductorâs 1.33x, charge pump switching architecture is
patented.
Features
⢠High Efficiency 1.33x Charge Pump
⢠Charge Pump: 1x, 1.33x, 1.5x, 2x
⢠Drives up to 4 LEDs at 25 mA Each
⢠1âwire EZDim 32 Linear Steps
⢠Power Efficiency up to 92%
⢠Low Noise Input Ripple in All Modes
⢠âZeroâ Current Shutdown Mode
⢠Soft Start and Current Limiting
⢠Short Circuit Protection
⢠Thermal Shutdown Protection
⢠3 mm x 3 mm, 16âpad TQFN Package
⢠These Devices are PbâFree, Halogen Free/BFR Free and are RoHS
Compliant
Applications
⢠LCD Display Backlight
⢠Cellular Phones
⢠Digital Still Cameras
⢠Handheld Devices
http://onsemi.com
TQFNâ16
HV3 SUFFIX
CASE 510AD
PIN CONNECTIONS
1
LED2
C2â
LED3
C2+
LED4
C1â
RSET
C1+
(Top View)
MARKING DIAGRAM
JAAN
AXXX
YWW
JAAN = CAT3648HV3âGT2
A = Assembly Location
XXX = Last Three Digits of Assembly Lot Number
Y = Production Year (Last Digit)
WW = Production Week (Two Digits)
ORDERING INFORMATION
Device
CAT3648HV3âGT2
(Note 1)
Package
TQFNâ16
(PbâFree)
Shippingâ
2000 /
Tape & Reel
1. NiPdAu Plated Finish (RoHSâcompliant).
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2014
1
August, 2014 â Rev. 3
Publication Order Number:
CAT3648/D
|
▷ |