|
CAT102 Datasheet, PDF (1/8 Pages) Catalyst Semiconductor – Precision, Adjustable Shunt Regulator (600mV Reference) | |||
|
Precision, Adjustable Shunt Regulator
(600 mV Reference)
CAT102
FEATURES
 600 mV low voltage reference
 ±6 mV initial accuracy
 High PSRR: 45 dB at 300 kHz
 Better line regulation: 1 mV (VIN from 2.2 V to 18 V)
 Low supply current: 90 µA
 Open drain output
 Directly drives optocouplers
 Industrial temperature range of -40ºC to 85ºC
 RoHS-compliant 5-lead TSOT23 package
APPLICATION
 SMPS control loop
 Low temperature coefficient voltage reference
 Power management
 Replaces zener diodes
 Isolated DC-to-DC converters
 Network, telecom and cellular base station
 Adjustable voltage reference
DESCRIPTION
The CAT102 is a low-voltage reference and amplifier.
Designed for the control loop of low-voltage power
supplies, the reference voltage has been designed for
600 mV. Over a temperature from -40°C to 85°C, the
reference voltage is within 8 mV of the nominal
600mV. In addition, the error amplifier output and the
supply voltage pin (IN) are on separate pins.
Power supply rejection is a high 45 dB at 300 kHz.
The output, OUT, can sink 20 mA at a maximum
saturation voltage of 250 mV.
When combined with an optocoupler, the CAT102 can
be used as an error amplifier that controls the
feedback loop in isolated low-output voltage switching
power supplies.
For Ordering Information details, see page 7.
FUNCTIONAL DIAGRAM
1
FB
Error
Amplifier
VREF +
â
600mV
IN
5
+
â
OUT
3
2
GND
PIN CONFIGURATION
TSOT-23 5L
Top View
FB 1 1
GND 2 2
OUT 4 3
5 8 IN
4 5 NC
PIN DESCRIPTION
Pin Name
FB
GND
OUT
NC
IN
Function
Inverting input to error amplifier
Ground
Output of error amplifier. Source & sink
current capability is 20 mA.
No connection
Positive supply
© 2009 SCILLC. All rights reserved.
1
Characteristics subject to change without notice
Doc. No. MD-4007 Rev. P
|
▷ |