|
AMIS-30422 Datasheet, PDF (1/45 Pages) ON Semiconductor – Micro-Stepping Stepper Motor Bridge Controller | |||
|
AMIS-30422
Micro-Stepping Stepper
Motor Bridge Controller
Introduction
The AMISâ30422 is a micro-stepping stepper motor bridge
controller for large current range bipolar applications. The chip
interfaces via a SPI interface with an external controller in order to
control two external power NMOS Hâbridges. It has an on-chip
voltage regulator, current sensing, self adapting PWM controller and
pre-driver with smart slope control switching allowing the part to be
EMC compliant with industrial and automotive applications. It uses a
proprietary PWM algorithm for reliable current control.
The AMISâ30422 contains a current translation table and takes the
next micro-step depending on the clock signal on the âNXTâ input pin
and the status of the âDIRâ (direction) register or input pin. The chip
provides a so-called âSpeed and Load Angleâ output. This allows the
creation of stall detection algorithms and control loops based on load
angle to adjust torque and speed.
The AMISâ30422 is implemented in a mature technology, enabling
fast high voltage analog circuitry and multiple digital functionalities
on the same chip. The chip is fully compatible with automotive
voltage requirements.
The AMISâ30422 is easy to use and ideally suited for large current
stepper motor applications in the automotive, industrial, medical and
marine environment. With the onâchip voltage regulator it further
reduces the BOM for mechatronic stepper applications.
Key Features
⢠Dual HâBridge PreâDrivers for 2âPhase Stepper Motors
⢠Programmable Current via SPI
⢠Onâchip Current Translator
⢠SPI Interface
⢠Speed and Load Angle Output
⢠9 Step Modes from Full Step up to 128 MicroâSteps
⢠CurrentâSense via Two External Sense Resistors
⢠PWM Current Control with Automatic Selection of Fast and Slow
Decay
⢠Low EMC PWM with Selectable Voltage Slopes
⢠Full Output Protection and Diagnosis
⢠Thermal Warning and Shutdown
⢠Compatible with 3.3 V Microcontrollers
⢠Integrated 3.3 V Regulator to Supply External Microcontroller
⢠Integrated Reset Function to Reset External Microcontroller
⢠Integrated Watchdog Function
⢠These Devices are PbâFree and are RoHS Compliant
http://onsemi.com
1 48
QFN48
CASE 485AJ
MARKING DIAGRAM
1
AMIS30422
0C422â001
AWLYYWW
A
= Assembly Location
WL
= Wafer Lot
YY
= Year
WW
= Work Week
G
= PbâFree Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 44 of this data sheet.
© Semiconductor Components Industries, LLC, 2013
1
March, 2013 â Rev. 0
Publication Order Number:
AMISâ30422/D
|
▷ |