74HC244 Datasheet, PDF (1/7 Pages) NXP Semiconductors – Octal buffer/line driver; 3-state

74HC244
Octal 3−State Noninverting
Buffer/Line Driver/
Line Receiver
High−Performance Silicon−Gate CMOS
The 74HC244 is identical in pinout to the LS244. The device inputs
are compatible with standard CMOS outputs; with pullup resistors,
they are compatible with LSTTL outputs.
This octal noninverting buffer/line driver/line receiver is designed
to be used with 3−state memory address drivers, clock drivers, and
other bus−oriented systems. The device has noninverting outputs and
two active−low output enables.
The HC244 is similar in function to the HC240A.
Features
• Output Drive Capability: 15 LSTTL Loads
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 mA
• High Noise Immunity Characteristic of CMOS Devices
• In Compliance with the Requirements Defined by JEDEC Standard
No. 7A
• ESD Performance: HBM > 2000 V; Machine Model > 200 V
• Chip Complexity: 136 FETs or 34 Equivalent Gates
• This is a Pb−Free Device
20
1
http://onsemi.com
MARKING
DIAGRAM
20
TSSOP−20
DT SUFFIX
CASE 948E
1
HC
244
ALYW G
G
HC244 = Specific Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2007
1
March, 2007 − Rev. 0
Publication Order Number:
74HC244/D