2N5038_06 Datasheet, PDF (1/3 Pages) ON Semiconductor – NPN Silicon Transistors

ON Semiconductort
NPN Silicon Transistors
. . . fast switching speeds and high current capacity ideally suit these
parts for use in switching regulators, inverters, wide−band amplifiers
and power oscillators in industrial and commercial applications.
• High Speed − t_f = 0.5 μs (Max)
• High Current − I_C(max) = 30 Amps
• Low Saturation − V_CE(sat) = 2.5 V (Max) @ I_C = 20 Amps
w This device is available in Pb−free package(s). Specifications herein
apply to both standard and Pb−free devices. Please see our website at
www.onsemi.com for specific Pb−free orderable part numbers, or
contact your local ON Semiconductor sales office or representative.
2N5038
20 AMPERE
NPN SILICON
POWER TRANSISTOR
90 VOLTS
140 WATTS
CASE 1−07
TO−204AA
(TO−3)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ *MAXIMUM RATINGS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Rating
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Collector−Base Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Collector−Emitter Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ^{Emitter−Base Voltage}
Collector Current − Continuous
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Peak (1)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Base Current − Continuous}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Total Device Dissipation @ TC = 25_C}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Derate above 25_C}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Operating and Storage Junction Temperature Range
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{THERMAL CHARACTERISTICS}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Characteristic}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Thermal Resistance, Junction to Case}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ *Indicates JEDEC Registered Data.
Symbol
V_CBO
V_CEV
V_EBO
I_C
I_CM
I_B
P_D
T_J, T_stg
Symbol
R_θJC
Value
150
150
7
20
30
5
140
0.8
– 65 to + 200
Max
1.25
Unit
Vdc
Vdc
Vdc
Adc
Adc
Watts
W/_C
_C
Unit
_C/W
(1) Pulse Test: Pulse Width v 10 ms, Duty Cycle v 50%.
V_CC
+30 V
R_C
2.5
+11 V
0
−9 V
10 Ω
1N4933
PW = 20 μs
DUTY CYCLE = 1%
2N5038
−5 V
2N5039
I_C = 12 AMPS
I_B1 = I_B2 = 1.2 AMPS
I_C = 10 AMPS
I_B1 = I_B2 = 1.0 AMPS
Figure 1. Switching Time Test Circuit
© Semiconductor Components Industries, LLC, 2006
1
March, 2006 − Rev. 11
Publication Order Number:
2N5038/D