1SMB5913BT3_06 Datasheet, PDF (1/6 Pages) ON Semiconductor – 3 Watt Plastic Surface Mount Zener Voltage Regulators

1SMB5913BT3 Series
Preferred Device
3 Watt Plastic
Surface Mount
Zener Voltage Regulators
This complete new line of 3 Watt Zener diodes offers the following
advantages.
Features
• Zener Voltage Range − 3.3 V to 200 V
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• Flat Handling Surface for Accurate Placement
• Package Design for Top Side or Bottom Circuit Board Mounting
• Pb−Free Packages are Available
Mechanical Characteristics:
CASE: Void-free, transfer-molded plastic
FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 Seconds
LEADS: Modified L−Bend providing more contact area to bond pads
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
MAXIMUM RATINGS
Rating
Symbol Value Unit
Maximum Steady State Power
Dissipation @ T_L = 75°C
Measured at Zero Lead Length
Derate Above 75°C
Thermal Resistance from Junction−to−Lead
P_D
R_qJL
3.0
W
40 mW/°C
25 °C/W
Maximum Steady State Power Dissipation
@ T_A = 25°C (Note )
Derate Above 25°C
Thermal Resistance from Junction−to−Ambient
P_D
R_qJA
550 mW
4.4 mW/°C
226 °C/W
Operating and Storage Temperature Range
T_J, T_stg −65 to °C
+150
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. FR−4 board, using recommended footprint.
© Semiconductor Components Industries, LLC, 2006
1
July, 2006 − Rev. 6
http://onsemi.com
PLASTIC SURFACE MOUNT
ZENER VOLTAGE
REGULATOR DIODES
3.3−200 V, 3 W DC POWER
Cathode
Anode
SMB
CASE 403A
PLASTIC
MARKING DIAGRAM
AYWW
9xxB G
G
A = Assembly Location
Y = Year
WW = Work Week
9xxB = Device Code (Refer to page 3)
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping^†
1SMB59xxBT3
1SMB59xxBT3G
SMB
SMB
(Pb−Free)
2500/Tape & Reel
2500/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics table on page 3 of
this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
1SMB5913BT3/D