E2E2-X2C1 Datasheet, PDF(7/9 Page) Omron Electronics LLC

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

E2E2-X2C1 Datasheet, PDF (7/9 Pages) Omron Electronics LLC – Long Barrel Inductive Prox

◁

E2E2 3-Wire DC

Installation

J PIN ARRANGEMENT

E2E2-XjBj-M1 DC 3-wire Models

Output configuration

Applicable models

E2E2-XjB1-M1

Pin arrangement

Load

E2E2-XjC1-M1

Load

E2E2-XjB2-M1

Load

E2E2-XjC2-M1

Load

E2E2 3-Wire DC

Note: Terminal 2 is not used.

Note: Terminal 4 is not used.

Precautions

J MOUNTING

Do not tighten the nut with excessive force. A washer must be

used with the nut.

Shielded Model

Unshielded Model

Note:

The table below shows the tightening torques for part A and

part B nuts. In the previous examples, the nut is on the sen-

sor head side (part B) and hence the tightening torque for

part B applies. If this nut is in part A, the tightening torque for

part A applies instead.

Type

M12

M18

M30

Torque

30 N S m (310 kgf S cm)

70 N S m (710 kgf S cm)

180 N S m (1,800 kgf S cm)

Part B Part A

▷