D2HW Datasheet, PDF (7/10 Pages) Omron Electronics LLC – Sealed Subminiature Snap Action Switch

Note: 1. All units are in millimeters unless otherwise indicated.
2. Dimensions not indicated in the diagrams below have a tolerance of ±0.2 mm.
3. The operating characteristics are for operation in the A direction ( ).
Hinge Roller Lever Models
D2HW-@24@@
4.8 dia. ×2.8 A
resin roller
FP _OP
TTP
8±0.1
15
t=0.3 stainless
steel lever
(1.15)
(4.6)
3
6.5
(0.4)
Characteristic
Models with posts and
M3-mounting models
OF max.
RF min.
OT ref.
MD max.
FP max.
OP
TTP max.
0.65 N {66 gf}
0.03 N {3 gf}
1.9 mm (reference value)
0.6 mm
15.3 mm
14±0.6 mm
12.3 mm
Leaf Lever Models
D2HW-@26@@
A
t = 0.3 stainless
steel lever
Characteristic
Models with posts and
M3-mounting models
OF max.
RF min.
OT ref.
MD max.
FP max.
OP
TTP max.
1.8 N {183 gf}
0.20 N {20 gf}
1.8 mm (reference value)
0.5 mm
9.3 mm
7.4±0.5 mm
5.8 mm
Simulated Roller Leaf Lever Models
D2HW-@27@@
A
t = 0.3 stainless
steel lever
Characteristic
Models with posts and
M3-mounting models
OF max.
RF min.
OT ref.
MD max.
FP max.
OP
TTP max.
1.8 N {183 gf}
0.20 N {20 gf}
2.0 mm (reference value)
0.5 mm
12.5 mm
10.8±0.5 mm
8.9 mm
Long Leaf Lever Models
D2HW-@28@@
A
20.85±1
t = 0.2 stainless
steel lever
(12)
3 _-0.01dia.
3.3±0.15 dia.
COM AVSS 0.5
(Black)
NO AVSS 0.5 (Blue)
NC AVSS 0.5 (Red)
(13.3)
Characteristic
Models with posts and
M3-mounting models
OF max.
RF min.
OT ref.
MD max.
FP max.
OP
TTP max.
0.9 N {92 gf}
0.05 N {5 gf}
2.8 mm (reference value)
0.7 mm
19 mm
15.4±1.5 mm
12.8 mm
Note: UL1007 AWG24 wires are used for UL/CSA
approved models.
Sealed Subminiature Snap Action Switch D2HW 187