HMC-EF583 Datasheet, PDF (6/24 Pages) Omron Electronics LLC – Programmable Controller

Less Effort in Designing and Debugging
Advantages of One Package
Use of a single USB cable simplifies both design and debugging.
Use of a commercially available USB
cable allows easy, high-speed
transferring of screen data and ladder
programs. There is also no need to
change cables for transfers such as
these.
Commercially available
USB cable
(1) Power ON
(2) Simply connect the USB cable and you are ready
to transfer screen data and ladder programs.
Continue using your software assets.
Continue to use all the screen data for
NS-series PTs and ladder programs
for CS/CJ-series PLCs.
CX-Designer
Designer for NS series
CX-Programmer Ladder Programming Software
Simply turn ON the power and start using it. No need for initial settings.
There is no need to connect the
Controller Section and Display
Section, and no need to make initial
communications settings or other
settings.
The system starts up as soon as the
power is turned ON. Even the
standard-equipped DeviceNet Master
is completely set in the default
settings.
Set the RS-232C
port for the PLC.
Communications
error: Cannot
connect to PLC.
10
The CX-One Integrated FA Tool Package Is Available
This software can be used to debug ladder programs and
screens without even having to connect to an actual system.
The test functions of the CX-Designer Screen Designer for NS Series have been further strengthened. By
selecting CX-Simulator as the connection destination, screen data and ladder programs can be
simultaneously tested without even having to connect to an actual system.
Integrated Simulation
Ladder Program Window
Touch Screen
CX-One version 2.0 or
higher on computer
Ladder Program
Touch Panel
Interactive
Interactive
The SAP Library, which dramatically reduces effort in design,
has also been greatly expanded.
More than 2,000 Smart Active Parts (SAP) are available for directly accessing OMRON PLCs and
components. Simply copy them from the library and paste them onto the screen. There is absolutely no
need to design screens or ladder programs for these objects.
A setting and monitoring screen is instantly completed for
Temperature Controllers
CX-Designer
Screen Designer for
NS Series
SAP Library
(Temperature Controller objects)
11