G3NE_1 Datasheet, PDF (5/8 Pages) Omron Electronics LLC – Solid State Relays

■ Approvals
UL Recognized (File No. E64562) / CSA Certified (File No. LR35535) - - Ambient Temp. = 40°C
Input voltage
5, 12, 24 VDC
SSR type
G3NE-205
G3NE-210
G3NE-210
G3NE-220
G3NE-220
Output ratings
5A resistive, 240 VAC
3A Tungsten, 240 VAC
3.2A FLA/ 19.2A LRA, 240 VAC 50/60 Hz
10A resistive, 240 VAC
7.5A Tungsten, 240 VAC
4.8A FLA/ 28.8A LRA, 240 VAC 50/60 Hz
5A resistive, 240 VAC
5A Tungsten, 240 VAC
3A FLA/ 18A LRA, 240 VAC 50/60 Hz
20A resistive, 240 VAC
11A Tungsten, 240 VAC
11.1A FLA/ 66.6A LRA, 240 VAC 50/60 Hz
6A resistive, 240 VAC
6A Tungsten, 240 VAC
3.3A FLA/ 19.8A LRA, 240 VAC 50/60 Hz
Precautions
Do not apply excessive force to the terminals. Exercise care when
pulling or inserting the terminal clips.
When attaching a heat sink to the G3NE, apply heat-conductive
grease on the heat sink. Tighten the mounting screws of the heat
sink with a torque of 0.59 to 0.98 N•m
Thermal Resistance Rth (Back of Junction SSR)
Model
Thermal resistance (°C/W)
G3NE-205T (L) 2.72
G3NE-210T (L) 2.12
G3NE-220T (L) 2.22
EMC Directive Compliance
The G3NE complies with EMC Directives under the following
conditions ("-US" models only).
10 m max.
Load
Input G3NE-US Output
Film capacitor:
• 1 µF, 250 VAC
• Connect a film capacitor to the load power supply.
• The input cable must be less than 10 m.
Solid State Relays G3NE 425