E2E-X5E1-M1 Datasheet, PDF (5/5 Pages) Omron Electronics LLC – Short Barrel Inductive Prox

E2E 3-Wire DC
E2E 3-Wire DC
J STANDARD SIZE SENSORS
Part number
Size
Type
Sensing distance
Supply voltage
(operating voltage
range) (See Note 1.)
Current consumption
Sensing object
Setting distance
Standard object
(mild steel)
Differential travel
Response frequency
Operation (with
sensing object
approaching)
Control output
(switching capacity)
Circuit protection
Indicator
Ambient temperature
(See Note 2.)
Ambient humidity
Temperature
influence
Voltage influence
Residual voltage
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Enclosure
rating
Weight
IEC
NEMA
Pre-wired
Connector
Material
Body
Sensing
face
E2E-X1R5 E2E-X2ME E2E-X2Ej E2E-X5ME
Ej/Fj-N j/ Fj-N / Fj-N
j/Fj-N
M8
M12
Shielded
Unshielded Shielded
Unshielded
1.5 mm
(0.06 in)
±10%
2 mm (0.08 2 mm (0.08 5 mm (0.20
in) ±10% in) ±10% in) ±10%
12 to 24 VDC, ripple (p-p): 10% max., (10 to 40 VDC)
E2E-X5Ej
/ Fj-N
M18
Shielded
5 mm (0.20
in) ±10%
E2E-X10M
Ej/Fj-N
Unshielded
10 mm
(0.39 in)
±10%
E2E-X10E
j/ Fj-N
M30
Shielded
10 mm
(0.39 in)
±10%
E2E-X18M
Ej/ Fj-N
Unshielded
18 mm
(0.71 in)
±10%
13 mA max.
Magnetic metals (refer to Engineering Data for non-magnetic metals)
0 to 1.2
mm (0 to
0.05 in)
0 to 1.6
mm (0 to
0.06 in)
0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm
(0 to 0.06 (0 to 0.16 (0 to 0.16
in)
in)
in)
8x8x
1 mm (0.31
x 0.31 x
0.04 in)
12 x 12 x
1 mm
(0.47 x 0.47
x 0.04 in)
12 x 12 x
1 mm
(0.47 x 0.47
x 0.04 in)
15 x 15 x
1 mm
(0.59 x 0.59
x 0.04 in)
18 x 18 x
1 mm
(0.71 x 0.71
x 0.04 in)
10% max. of sensing distance
2.0 kHz
0.8 kHz
1.5 kHz
0.4 kHz
0.6 kHz
E1 models: Load ON
E2 models: Load OFF
0 to 8.0 mm
(0 to 0.31
in)
30 x 30 x
1 mm
(1.18 x 1.18
x 0.04 in)
0.2 kHz
0 to 8.0 mm
(0 to 0.31
in)
30 x 30 x
1 mm
(1.18 x 1.18
x 0.04 in)
0.4 kHz
0 to 14.0
mm (0 to
0.55 in)
54 x 54 x
1 mm
(2.13 x 2.13
x 0.04 in)
0.1 kHz
200 mA max.
Reverse connection protection, surge absorber, load short-circuit protection
Operation indicator (red LED)
Operating: --40°C to 85°C (--40°F to 185°F) with no icing
Operating: 35% to 95%
±15% max. of sensing distance at 23°C in temperature range of --40°C to 85°C (--40°F to 185°F)
±10% max. of sensing distance at 23°C in temperature range of --25°C to 70°C (--13°F to 158°F)
±1% max. of sensing distance in rated voltage range ±15%
2.0 V max. (under load current of 200 mA with cable length of 2 m)
50 MΩ min. (at 500 VDC) between current carry parts and case
1,000 VAC for 1 min. between current carry parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z axes
500 m/s² (approx. 50G)
for 10 times each in X, Y,
and Z axes
1,000 m/s² (approx. 50G) for 10 times each in X, Y, and Z axes
500 m/s² (approx. 50G) for E2E-X5M
IP67
1, 4, 6, 12, 13
Approx. 45 g
Approx. 120 g
Approx. 160 g
Approx. 270 g
---
Approx. 25 g
Approx. 45 g
Approx.
125 g
Approx.
124 g
Stainless steel
Brass
PBT
Note: 1. E2E models with an M18 or M30 connector operate at a non-smoothed, all-wave rectified, mean voltage range of 24 VDC ±20%.
2. When using an E2E with an M8 connector at an ambient temperature range between 70°C and 85°C (158°F and 185°F), supply
10 to 30 VDC to the E2E and make sure that the E2E has a control output of 100 mA maximum.
6