Z-15HW78-B7 Datasheet, PDF (4/18 Pages) Omron Electronics LLC – Basic Switch

Z
Z
Characteristics
Operating speed
Operating frequency
Insulation resistance
Contact resistance
Dielectric strength (VAC)
Vibration
Shock
Ambient temperature
Humidity
Service life
Weight
Mechanical
Electrical
G contact gap model
H contact gap model
Malfunction
Mechanical durability
Malfunction
Standard types
Drip-proof types
Standard types
Drip-proof types
Mechanical
Electrical
Standard
(except flexible rod types)
Standard flexible rod types
(coil spring and steel wire type)
0.01 mm to 1 m/second (see note 2)
1 mm to 1 m/second
240 operations/min.
120 operations/min.
20 operations/min.
20 operations/min.
100 MΩ min. (at 500 VDC)
50 mΩ max. (initial)
15 mΩ max. (initial)
1,000 VAC, 50/60 Hz for 1 minute between terminals of same polarity
600 VAC, 50/60 Hz for 1 minute
2,000 VAC, 50/60 Hz for 1 minute between current carrying metal parts and
ground and between each terminal and non-current carrying metal parts
10 to 55 Hz, 1.5 mm
double amplitude (see note 4)
10 to 20 Hz, 1.5 mm
double amplitude
1,000 m/s² min. (approx. 100 g)
300 m/s² min. (approx. 30 g) (see note 3) 50 m/s² min. (approx. 5 g)
-25° to 80°C (with no icing)
-15° to 80°C (with no icing)
35% to 85% RH
35% to 95% RH
G, H contact gap models
20,000,000 operations min. (see note 4)
1,000,000 operations min.
G, H contact gap models
500,000 operations min. (see note 2)
100,000 operations min.
Approx. 22 to 58 g
Approx. 42 to 48 g
Note: 1. Data shown are of initial value.
2. Apply to the pin plunger models or the pin plunger of the lever models.
3. Apply to Z-15G.
4. Apply to the pin plunger models.
s ACCESSORIES (order separately)
Operating Characteristics (when used with Z-15)
Characteristics
OF max.
RF min.
PT max.
OT min.
MD max.
FP max.
OP
ZAA-1
w/Z-15G-B
500 g
170 g
—
12.7 mm
2.2 mm
34.5 mm
28.9±1.6 mm
ZAA-2
w/Z-15G-B
500 g
170 g
—
12.7 mm
2.2 mm
46.1 mm
40.4±1.6 mm
Terminal enclosures - Standard models
Material
Phenolic resin
Metal
Polyvinyl chloride
Mounting method
Side mounting
Side mounting
Side mounting
For solder terminal
AP-A
AP1-A
AP-Z
For screw terminal
AP-B
AP1-B
AP-Z
Remarks
—
Use in conjunction with AP-A and AP-B
Excels in safety and dust-proofing property
4