G3NE Datasheet, PDF (4/4 Pages) Omron Electronics LLC – Compact, Low-cost, SSR Switching 5 to 20 A

Precautions
Refer to the Technical Information for SSRs (Cat. No. J137) for gen-
eral precautions.
I Correct Use
Do not apply excessive force to the terminals. Exercise care when
pulling or inserting the terminal clips for the Quick Connector (QC).
When attaching a heat sink to the G3NE, in order to facilitate heat
dissipation, apply heat conductive grease on the heat sink. Tighten
the mounting screws of the heat sink with a torque of 0.59 to 0.98
N·m.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K062-E1-03
In the interest of product improvement, specifications are subject to change without notice.
J-20
Solid-state Relay G3NE