XW2Z-S002 Datasheet, PDF (3/24 Pages) Omron Electronics LLC – Combining the controller and HMI into a single unit contributes to downsizing and standardizing control panels, while eliminating inefficiency, waste, and inconsistency on production sites.

Greater Control Panel Downsizing
and Standardizing
As production becomes increasingly globalized, the needs for standardized
control panels are growing. With its new, one-package concept, the SYSMAC One
NSJ Series contributes to reducing both hardware and software requirements for
control panels. While offering the same convenient operation for control panels
in any factory, any process, and any device worldwide, the NSJ Series eliminates
various forms of inefficiency, waste, and inconsistency that extend all the way
from device design and installation, to maintenance.
Today's manufacturing
facilities are becoming
increasingly space-efficient
and standardized. The 400-
to 500-mm panel width will
likely become mainstream.
Many control panels have
a width of 400 to 500 mm.
As an example, the SYSMAC One NSJ5 Series makes it possible to
design a control panel this compact.
For example,
250 mm wide
For example,
220 mm deep
4
No More PLC Space Required.
The PLC comes as
standard equipment
along with the HMI.
The Display Section and
Controller Section each have a
CPU. Control is highly reliable
because it is not affected by the
designing and communications
of the Display Section.
A DeviceNet Master
comes as standard
equipment for I/O.
There is no need for initial
settings, and wiring is greatly
reduced. Also standardization and
streamlining design can be
realized.
Efficient use of the space inside the control panel.
Since there is no PLC space required, the space
inside the control panel can be more efficiently
used. For example, it can be used to mount the
power supply, breakers, or terminal blocks directly
behind the Display Section.
Especially slim at 73.3 mm.
Both the Display Section and Controller Section
combined have a width of only 73.3 mm*. There
is also no need for a PLC Power Supply Unit.
(*For the NSJ8/10/12 Series. The NSJ5 Series is
79.0 mm.)
NSJ Series Appearance and Parts Names
Only 73.3 mm
(For NSJ8/10/12 Series. The
NSJ5 Series is 79.0 mm.)
Expansion Unit (optional)
Controller Section
Display Section
[NSJ Main Unit]
Expansion Unit interface
One Expansion
Unit
Controller
Section
Display Section
Expansion Unit
Controller Link Unit
I/O Control Unit
USB port
(The photo shows
the NSJ8 Controller.)
Ethernet Unit
For more details, refer to page 7.
5