EESX911PR1M Datasheet, PDF (3/9 Pages) Omron Electronics LLC – Meeting Customer Needs with Compact Sensors that Mount with M3 Screws

Ratings and Specifications
EE-SX91
Type
Standard
L-shaped
F-shaped
R-shaped
U-shaped
NPN
mod-
els
Pre-wired models EE-SX910-R
Models with con-
nectors
EE-SX910-C1J-R
EE-SX911-R
EE-SX911-C1J-R
EE-SX912-R
EE-SX912-C1J-R
EE-SX913-R
EE-SX913-C1J-R
EE-SX914-R
EE-SX914-C1J-R
Item
PNP
mod-
els
Pre-wired models EE-SX910P-R
EE-SX911P-R
EE-SX912P-R
EE-SX913P-R
EE-SX914P-R
Models with con-
nectors
EE-SX910P-C1J-R EE-SX911P-C1J-R EE-SX912P-C1J-R EE-SX913P-C1J-R EE-SX914P-C1J-R
Sensing distance
5 mm (slot width)
Sensing object
Opaque: 1.2 × 0.8 mm min.
Differential distance
0.025 mm max.
Light source
GaAs infrared LED with a peak wavelength of 940 nm
Indicator
Light indicator (red LED)
Supply voltage
5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption
15 mA max.
Control output
Load power supply voltage: 5 to 24 VDC
Load current: 100 mA max.
OFF current: 0.5 mA max.
100 mA load current with a residual voltage of 1.0 V max.
5 mA load current with a residual voltage of 0.4 V max.
Protection circuits
Power supply reverse polarity protection; output reverse polarity protection
Response frequency
3 kHz min. (8 kHz average) Light incident: 15 µs average; light interrupted: 40 µs average*
Ambient illumination
1,000 lx max. with fluorescent light on the surface of the receiver
Ambient temperature range
Operating: −25 to 55°C
Storage: −30 to 80°C (with no icing or condensation)
Ambient humidity range
Operating: 5% to 85%
Storage: 5% to 95% (with no icing or condensation)
Vibration resistance (Destruction)
10 to 2,000 Hz
0.75-mm single amplitude for 2.5 h (15-min periods, 10 cycles) each in X, Y, and Z directions
Shock resistance (Destruction) 500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection
IEC60529 IP50
Connecting method
Pre-wired Models (standard cable length: 1 m), Models with Connectors (standard cable length: 0.3 m)
Pre-wired Models Approx. 17 g
Weight
(packed state)
Models with Con-
nectors
Approx. 7 g
Mate- ^Case/cover
rials _{Emitter/receiver}
Polybutylene phthalate (PBT)
Polycarbonate (PC)
Applicable Connector
Product Connector with Robot Cable
Model EE-1016-R
Appearance
* The response frequency was measured by detecting the following rotating
disk. The response times for light incidence and light interruption are shown in
the timing chart.
Disk
Item
Contact resistance
Insertion strength
Surplus strength
(housing holding
strength)
Cable length
Ambient temperature
range
Mate- ^Housing
rials _Contact
25 mΩ max.
(at 10 mA DC and 20 mV max.)
20 N max.
15 N min.
2m
−25 to 85°C
Nylon
Phosphor bronze
2 mm
1 mm
t=0.2 mm
2 mm
Light incident
Light interrupted
OUT1 output ^ON
transistor ^OFF
OUT2 output ^ON
transistor ^OFF
15 µs avg.
40 µs avg.
3