E3Z-D61 Datasheet, PDF (3/15 Pages) Omron Electronics LLC – Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity

E3Z
M8 Connectors
Appearance
Straight
Right angle
Cable type
2 m (6.56 ft)
5 m (16.40 ft)
2 m (6.56 ft)
5 m (16.40 ft)
Four-wire type
E3Z
Part number
XS3F -M421 -402 -A
XS3F -M421 -405 -A
XS3F -M422 -402 -A
XS3F -M422 -405 -A
Specifications
Item
Sensing method
NPN output
PNP output
Sensing distance
Standard sensing object
Hysteresis
Directional angle
Light source (wave length)
Power supply voltage
Current consumption
Control output
Circuit protection
Response time
Sensitivity adjustment
Ambient
Incandescent lamp
illumination
(receiver side)
Sunlight
Ambient
temperature
Operating
Storage
Ambient
humidity
Operating
Storage
Insulation resistance
Dielectric strength
Vibration resistance
Shock
resistance
Destruction
Enclosure rating
Approvals
Connection method
Indicator
Weight
(packed state)
Material
Accessories
Pre-wired cable (2 m)
Connector
Through-beam
Polarized retroreflective Diffuse reflective
E3Z-T61/T66
E3Z-T81/T86
E3Z-R61/R66
E3Z-R81/R86
E3Z-D61/D66
E3Z-D81/D86
E3Z-D62/D67
E3Z-D82/D87
15 m
100 mm (4 m Note 1)
(when using E39-R1S)
100 mm (3 m Note 2)
(when using E39-R1)
White paper
(110000m×_m100 mm):
White paper
(13m00×300 mm):
Opaque: 12 mm
Opaque: 75 mm
---
(dia. min.)
(dia. min.)
---
20% max. of setting distance
Both emitter and
2 to 10°
---
receiver: 3 to 15°
Infrared LED (860 nm) Red LED (680 nm)
Infrared LED (860 nm)
12 to 24 VDC ±10% including 10% (p-p) max. ripple
Emitter: 15 mA
Receiver: 20 mA
30 mA max.
100 mA max. at 26.4 VDC, open collector output
(residual voltage: 1 V max.)
L-ON/D-ON, switch selectable
Load short-circuit and Reversed power supply connection, output short-circuit, and mutual
reversed power supply interference protection
protection
1 ms max.
One-turn potentiometer
3,000 lux max.
10,000 lux max.
-- 25°C to 55°C (-- 13°F to 131°F)
-- 40°C to 70°C (-- 40°F to 158°F) with no icing or condensation
35% to 85%
35% to 95% with no condensation
20 MΩ min. at 500 VDC
1,000 VAC, 50/60 Hz for 1 min
10 to 55 Hz, 1.5-mm double amplitude or 300 m/s² for 2 hours each in X, Y, and Z axes
500 m/s² 3 times each in X, Y, and Z axes
IP67 (IEC60529)
CE
2 m cable or M8 connector
Operation indicator (orange)
Stability indicator (green)
Emitter has power indicator (orange) only
Approx. 120 g (4.2 oz) Approx. 65 g (2.3 oz)
Approx. 30 g (1.1 oz) Approx. 20 g (0.7 oz)
Case: PBT (polybutylene terephthalate); Lens: Methacrylate resin
Instruction manual (Order Reflector and Mounting Bracket separately.)
Note: 1. Sensing distance can be extended up to 4 meters when the E39-R1S reflector is used.
2. Sensing distance can be extended up to 3 meters when the E39-R1 reflector is used.
4