E3T-SL13 Datasheet, PDF (3/16 Pages) Omron Electronics LLC – Subminiature Photoelectric Sensor

E3T
E3T
Specifications
J RATINGS/CHARACTERISTICS
Sensing method
Shape
Output type
Part number Light-ON
Dark-ON
Sensing distance
Standard sensing target
Min. sensing target
(typical)
Hysteresis
Optical
angle
Emitter
Receiver
Light source
(wave length)
Power supply voltage
Current consumption
Output
Circuit protection
(See Precautions
Section.)
Response time
Ambient
light
immunity
Incandes-
cent lamp
Sunlight
Ambient
Operating
temperature _Storage
Ambient
humidity
Operating
Storage
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Enclosure rating
Connection method
Weight (with packaging)
Materials
Case
Lens and
cover
Accessories included
Through-beam
Retroreflective
Side-view
Flat
Side-view
NPN PNP NPN PNP NPN PNP
-ST11 -ST13 -FT11 -FT13 -SR11 -SR13
-ST12 -ST14 -FT12 -FT14 -SR12 -SR14
1m
(adjustable
aperture is
available)
500 mm
10 to 200 mm
(with the E39-R4)
2 mm dia. min.
10 mm dia. min.
2 mm dia. min.
2 mm dia.
(sensing distance
at 100 mm)
---
3° to 10°
3° to 13°
2° to 5°
3° to 70°
3° to 70°
---
Red LED (“Pin-point” LED) (λ=670 nm)
Convergent beam
Diffuse reflective
Flat
NPN PNP NPN PNP NPN
PNP
-SL11 -SL13 -SL21 -SL23 -FD11 -FD13
-SL12 -SL14 -SL22 -SL24 -FD12 -FD14
5 to 15 mm
(50 x 50 mm
Kodak white
card)
5 to 30 mm
(50 x 50 mm
Kodak white
card)
5 to 30 mm
(50 x 50 mm
Kodak white card)
---
0.15 mm dia. (sensing distance at 10 mm)
2 mm max.
---
6 mm max.
6 mm max.
12 to 24 VDC ±10%, ripple (p-p) 10% max.
24 VDC
±10%
12 mA max. emitter/receiver
20 mA max.
Open collector, load current: 50 mA max. at 24 VDC, residual voltage: 1 V max.,
operation mode: Light-ON or Dark-ON (separate models)
Protection from reversed and
output short-circuit
Protection from reversed polarity, output short-circuit, and mutual
interference
1 ms max. each for on and off
5,000 ℓx max.
10,000 ℓx max.
--25°C to 55°C (--13°F to 131°F)
--40°C to 70°C (--40°F to 158°F) with no icing or condensation
35% to 85% RH
35% to 95% RH (with no condensation)
20 MΩ min. (at 500 VDC)
1,000 VAC, 50/60 Hz for 1 min
10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s² (approx. 30G) for 0.5 hrs each in X, Y, and Z axis
1,000 m/s² (approx. 100G) 3 times each in X, Y, and Z axis
IEC60529: IP67
Pre-leaded (standard length: 2 m), optional 5-M cable, optional robotic cable
Approx. 40 g
Approx. 20 g
PBT
Polycarbonate
Two each of M2 mounting screws, spring washers, and flat washers, and reflector (E39-R4: retroreflective
model only)
3