E3S-A Datasheet, PDF (3/18 Pages) Omron Electronics LLC – General-Purpose Photoelectric Sensor

E3S-A
E3S-A
SPECIFICATIONS (continued)
Part number
Sensitivity
Mutual interference
protection
E3S-ATuu
E3S-ARuu
E3S-ADu3,
E3S-ADu8
Adjustable, 2-turn knob with clutch and indicator
Not provided
Provided
Provided
E3S-ADu1,
E3S-ADu6
Provided
E3S-ADu2,
E3S-ADu7
Provided
Control
output
Type
NPN transistor, open collector (E3S-Au1u, E3S-Au2u, E3S-Au6u, E3S-Au7u),
(E3S-AD1u, E3S-AD2u, E3S-AD6u, E3S-AD7u)
PNP transistor, open collector (E3S-Au3u, E3S-Au4u, E3S-Au8u, E3S-Au9u),
(E3S-AD3u, E3S-AD4u, E3S-AD8u, E3S-AD9u₎
Max. load 100 mA max. at 30 VDC
Max.
1 VDC max. at 100 mA load current
ON-state
voltage drop
Self-diagnostics
alarm output
50 mA max. load at 30 VDC, NPN or PNP transistor open collector to match control output
Response time
OFF-delay timer
0.5 ms max. ON, 0.5 ms max. OFF
0 to 100 ms with 3/4 turn adjuster
Check
input
NPN
PNP
Response
time
Circuit protection
Indicators
Materials
Mounting
Lens
Case
Bracket
Connections Prewired
Connector
Weight
Prewired
Connector
Enclosure
rating
Ambient
temperature
IEC 144
NEMA
Operating
Storage
Light OFF: gray wire connected to 0 to1.5 VDC —
Light OFF: gray wire connected to supply
—
voltage (30 VDC max.)
0.5 ms max.
—
—
—
—
—
0.5 ms max.
Load short-circuit protection, reverse polarity protection
Emitter:
Operation (red)
Receiver:
Operation (red)
Stability (green)
Operation (red), Stability (green)
Denatured polyarylate
Polybutylene terephthalate (PBT)
Stainless steel
Either side surface with two threaded holes. Bracket E39-L69 for horizontal or E39-L70 for
vertical sensors and hardware included.
2 m (6.56 ft) long cable
M12 threaded connector, 4 pin
Emitter:
60 g (2.1 oz.)
Receiver:
60 g (2.1 oz.)
60 g (2.1 oz.)
60 g (2.1 oz.)
60 g (2.1 oz.)
60 g (2.1 oz.)
Emitter:
11 g (0.4 oz.)
Receiver:
11 g (0.4 oz.)
11 g (0.4 oz.)
11 g (0.4 oz.)
11 g (0.4 oz.)
11 g (0.4 oz.)
IP67
4X, 6
-25° to 55°C (-13° to 131°F) with no ice build-up
-40° to 70°C (-40° to 158°F)
s OUTPUT CIRCUIT DIAGRAMS
NPN Cable Type
Through-beam emitter E3S-AT11, E3S-AT61
Main
circuit
Red (Brown)
Black (Blue)
10 to 30
VDC
NOTE: IEC colors are shown in parentheses.
Through-beam receiver E3S-AT11, E3S-AT61
Retroreflective E3S-AR11, E3S-AR61
Diffuse reflective E3S-AD11, E3S-AD12, E3S-AD13, E3S-AD61,
E3S-AD62, E3S-AD63
Light Stability
(Red) (Green)
Red (Brown)
Main
circuit
Load
White (Black) (relay) _{10 to 30}
100 mA
VDC
Z_D
max.
Black (Blue)
3