H7EC-NV Datasheet, PDF (27/33 Pages) Omron Electronics LLC – Compact Economical Totalizer with High Visibility Available with Backlit LCD Display

Accessories (Order Separately) (Common)
H7E@-N@P
■ New H7E (Except for PCB-mounting Counter)
The New H7E models are supplied with a mounting bracket (Y92F-34) and nut. Additionally, the Y92F-75/-76/-77B Flush Mounting Adapters shown
here allow the New H7E models to be fitted to existing panel cutouts.
Y92F-35 Compact Flush Mounting Bracket
47.6
26
RST
2.4
18.6
Panel Cutout
Single mounting
4
Dense mounting
(48 × No. of units
− 2.5)^+10.0
30 min.
22.2^+00.5
22.2^+00.5
Degree of protection (front): IP40 (not waterproof)
The DIP switch of the H7E@-N can be operated in mounted condi-
tion. Vibration resistance and shock resistant are the same level as
the H7E@-N series.
Y92F-75 Flush Mounting Adapter
for 26 × 45.3 Rectangular Cutout
Use mounting bracket supplied with the Counter
31 24.2 22.2
45^+00.5
• The minimum mounting interval is 30 mm.
Note: An interval of 40 mm is recommended for easier wiring.
• Do not allow the ambient temperature of the H7E@-N to exceed the
specifications (55°C).
• Mounting is possible onto panels with a thickness of 1 to 5 mm.
Two 3.5 dia. mounting holes
26
26
Panel Cutout
Two, M3
(Color: light gray)
Y92F-76 Flush Mounting Adapter
for 27.5 × 52.5 Rectangular Cutout
45.2
4
48.2
63
72
Two 4.5 dia. countersunk holes
45.3
63
Panel Cutout
Two, M4
50 38 24.2 22.2
RST
(Color: light gray)
45.2
Use the Y92F-76 together with the Y92F-35 Compact
48.2
Flush Mounting Bracket.
60
Do not use the Flush Mounting Adapter supplied with the Counter.
Y92F-77B Flush Mounting Adapter
for 24.8 × 48.8 Rectangular Cutout
Use mounting bracket supplied with the Counter
28.8 24.2 22.2
45.2
48.2
(Color: light gray)
53.8
38 27.5
4
52.5
Panel cutout
24.8
4
48.8
Note: The mounting panel
thickness should be
between 1 and 5 mm.
27