PYF-08A Datasheet, PDF (2/17 Pages) Omron Electronics LLC – General-purpose Relay MY New model

■ Accessories (Order Separately)
Sockets
Poles
2
4
Front-mounting
Socket (DIN-track/
screw mounting)
PYF08A-E
PYF08A-N
PYF14A-E
PYF14A-N
Solder terminals
Without clip
With clip
PY08
PY08-Y1
PY14
PY14-Y1
Back-mounting Socket
Wire-wrap terminals
Without clip
With clip
PY08QN
PY08QN2
PY08QN-Y1
PY08QN2-Y1
PY14QN
PY14QN2
PY14QN-Y1
PY14QN2-Y1
PCB terminals
PY08-02
PY14-02
Socket Hold-down Clip Pairing
Relay type
Poles
Without 2-pole test 2
button
4
2-pole test button 2
Front-connecting Socket (DIN-track/
screw mounting)
Back-connecting Socket
Solder/Wire-wrap terminals
PCB terminals
Socket
Clip
Socket
Clip
Socket
Clip
PYF08A-E
PYF08A-N
PYC-A1
PY08(QN)
PYC-P
PYC-P2
PY08-02
PYC-P
PYC-P2
PYF14A-E
PYF14A-N
PY14(QN)
PY14-02
PYF08A-E
PYF08A-N
PYC-E1
PY08(QN)
PYC-P2
PY08-02
PYC-P2
Mounting Plates for Sockets
Socket model
PY08, PY08QN(2), PY14, PY14QN(2)
PYP-1
For 1 Socket
For 18 Sockets
PYP-18
Note: PYP-18 and PYP-36 can be cut into any desired length in accordance with the number of Sockets.
Track and Accessories
For 36 Sockets
PYP-36
Supporting Track (length = 500 mm)
Supporting Track (length = 1,000 mm)
End Plate
Spacer
PFP-50N
PFP-100N, PFP-100N2
PFP-M
PFP-S
Specifications
■ Coil Ratings
Rated voltage
AC 6 V*
12 V
24 V
48/50 V*
110/120 V
220/240 V
Rated current
50 Hz
214.1 mA
106.5 mA
53.8 mA
24.7/
25.7 mA
9.9/10.8 mA
4.8/5.3 mA
60 Hz
183 mA
91 mA
46 mA
21.1/
22.0 mA
8.4/9.2 mA
4.2/4.6 mA
Coil
resistance
Coil inductance
(reference value)
12.2 Ω
46 Ω
180 Ω
788 Ω
Arm. OFF
0.04 H
0.17 H
0.69 H
3.22 H
Arm. ON
0.08 H
0.33 H
1.30 H
5.66 H
4,430 Ω
18,790 Ω
19.20 H
83.50 H
32.1 H
136.4 H
Must
operate
voltage
Must
release
voltage
Max.
voltage
% of rated voltage
80% max. 30% min. 110%
Power
consumption
(approx.)
1.0 to 1.2 VA
(60 Hz)
0.9 to 1.1 VA
(60 Hz)
DC 6 V*
12 V
24 V
48 V*
100/110 V
151 mA
75 mA
37.7 mA
18.8 mA
9.0/9.9 mA
39.8 Ω
160 Ω
636 Ω
2,560 Ω
11,100 Ω
0.17 H
0.73 H
3.20 H
10.60 H
45.60 H
0.33 H
1.37 H
5.72 H
21.0 H
86.2 H
10% min.
0.9 W
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for rated currents and
±15% for DC coil resistance.
2. Performance characteristic data are measured at a coil temperature of 23°C.
3. AC coil resistance and impedance are provided as reference values (at 60 Hz).
4. Power consumption drop was measured for the above data. When driving transistors, check leakage current and connect a bleeder re-
sistor if required.
5. Rated voltage denoted by “*” will be manufactured upon request. Ask your OMRON representative.
2
General-purpose Relay MY New model