|
G8P1ATPDC12 Datasheet, PDF (2/6 Pages) Omron Electronics LLC – Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications | |||
|
◁ |
G8P
G8P
Specifications
â Coil Ratings
Rated voltage
Rated current
Coil resistance
Must operate voltage
Must release voltage
Max. voltage
Power consumption
5 VDC
9 VDC
185 mA
93 mA
27 ï
97 ï
75% max. of rated voltage
10% min. of rated voltage
120% of rated voltage
Approx. 900 mW
12 VDC
77 mA
155 ï
24 VDC
36 mA
660 ï
48 VDC
19 mA
2,480 ï
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of ±10%.
â Contact Ratings
110 VDC
9 mA
12,400 ï
Load
Rated load
Item
Contact material
Rated carry current
Max. switching voltage
Max. switching current
Max. switching capacity
Note: NO contact/NC contact
â Characteristics
SPST-NO
Resistive load (cosï¦ = 1)
30 A at 250 VAC;
20 A at 28 VDC
Ag Alloy (Cd free)
30 A
250 VAC, 28 VDC
AC: 30 A, DC: 20 A
7,500 VA, 560 W
SPDT
20 A/10 A (See note.) at 250 VAC;
20 A/10 A (See note.) at 28 VDC
20 A/10 A (See note.)
AC: 20 A/10 A, DC: 20 A/10 A (See note.)
5,000/2,500 VA, 560/280 W (See note.)
Contact resistance
Operate time
Release time
Max. operating frequency
Insulation resistance
Dielectric strength
Impulse withstand voltage
Vibration resistance
Shock resistance
Endurance
Ambient temperature
Ambient humidity
Weight
100 mï max.
15 ms max.
10 ms max.
Mechanical: 18,000 operations/hr
Electrical: 360 operations/hr (under rated load)
100 Mï min. (at 500 VDC)
2,500 VAC, 50/60 Hz for 1 min between coil and contacts
1,500 VAC, 50/60 Hz for 1 min between contacts of same polarity
6,000 V (1.2/50 µs) between coil and contacts
Destruction: 10 to 55 to 10 Hz, 0.825-mm single amplitude (1.65-mm double amplitude) for 2 hours
Malfunction: 10 to 55 to 10 Hz, 0.825-mm single amplitude (1.65-mm double amplitude) for 5 minutes
Destruction: 1,000m/s2 (approx. 100G)
Malfunction: 100 m/s2 (approx. 10G)
Mechanical: 10,000,000 operation min. (at 18,000 operations/hr)
Electrical: 100,000 operations min. (at rated load)
-55° to 105°C, cold coil condition (with no icing)
-55° to 85°C, hot coil condition (hot start) (with no icing)
Operating: 5% to 85%
G8P-1CP: Approx. 21 g, G8P-1CTP: Approx. 24 g
G8P-1C4P: Approx. 28 g, G8P-1C4TP: Approx. 31 g
Note: The data shown above are initial values.
243
|
▷ |