G5V1 Datasheet, PDF (2/4 Pages) Omron Electronics LLC – Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits

■ Coil Data
Rated
voltage
(VDC)
3
5
6
9
12
24
Rated current
Coil
(mA)
resistance
(Ω)
50
30
25
16.70
12.50
6.25
60
167
240
540
960
3,840
Coil inductance
(Ref. value) (H)
Armature OFF Armature ON
0.05
0.11
0.15
0.29
0.20
0.41
0.45
0.93
0.85
1.63
3.48
6.61
Pick-up
voltage
Dropout
voltage
Maximum
voltage
% of rated voltage
80%
10% min.
200%
at 23°C
Power
consumption
(mW)
Approx. 150
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. The operating characteristics are measured at a coil temperature of 23°C.
3. The maximum voltage is the highest voltage that can be imposed on the relay coil.
■ Characteristics
Contact resistance (See note 1)
100 mΩ max.
Operate time (See note 2)
5 ms max. (mean value: approx. 2.50 ms)
Release time (See note 2)
5 ms max. (mean value: approx. 0.90 ms)
Operating frequency (max.)
Mechanical
36,000 operations/hour
Electrical
1,800 operations/hour
Insulation resistance (See note 3)
1,000 MΩ min. (at 500 VDC between coil and contacts, at 250 VDC between
contacts of same polarity)
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between coil and contacts
400 VAC, 50/60 Hz for 1 minute between contacts of same polarity
Impulse withstand voltage
1,500 V (10 X 160 μs) between coil and contacts (conforms to FCC Part 68)
Vibration
Mechanical durability 10 to 55 Hz, 3.30 mm double amplitude
Malfunction durability
Shock
Mechanical durability 1,000 m/s² (approx. 100G)
Malfunction durability 100 m/s² (approx. 10 G)
Ambient temperature
-40°C to 70°C
Humidity
5% to 85% RH
Service life
Mechanical
5 million operations min. (at 18,000 operations/hour)
Electrical
100,000 operations min. (under rated load,1,800 ops/hr) See “Characteristic Data”
Weight
Approx. 2 g
Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method.
2. Values in parentheses are typical values unless otherwise stated.
3. The insulation resistance was measured with a 500-VDC Megohmmeter between coil and contacts and a 250 VDC megohmmeter between con-
tacts with the same polarity applied to the same parts as those for checking the dielectric strength.
4. The above values are initial values.
■ Approvals
UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C
Type
G5V-1
Contact form
SPDT
Coil rating
3 to 24 VDC
Contact ratings
0.5A at 125 VAC (General Use)
0.3 A at 110 VDC (Resistive)
1A at 30 VDC (Resistive)
Note: In the interest of product improvement, specifications are subject to change.
Number of test operations
100,000
6,000
40
Low Signal Relay G5V-1