G3VM401A Datasheet, PDF (2/4 Pages) Omron Electronics LLC – Analog-switching MOS FET Relays with 400-V Load Voltage

■ Absolute Maximum Ratings (Ta = 25°C)
Item
Symbol Rating Unit Measurement conditions
Input
LED forward current
Repetitive peak LED
forward current
LED forward current
reduction rate
I_F
50
I_FP
1
Δ I_F/°C −0.5
mA
A
100 μs pulses, 100 pps
mA/°C Ta ≥ 25°C
Note:
LED reverse voltage
Connection temperature
Output Load voltage (AC peak/DC)
Continuous load current
ON current reduction rate
Connection temperature
Dielectric strength between input and
output (See note 1.)
V_R
5
T_j
125
V_OFF
400
I_O
120
Δ I_ON/°C −1.2
T_j
125
V_I-O
2,500
V
°C
V
mA
mA/°C Ta ≥ 25°C
°C
V_rms
AC for 1 min
Operating temperature
Storage temperature
Soldering temperature (10 s)
T_a
−40 to +85 °C
T_stg
−55 to +125 °C
---
260
°C
With no icing or condensation
With no icing or condensation
10 s
1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
■ Electrical Characteristics (Ta = 25°C)
Item
Symbol
Mini-
mum
Typical
Maxi-
mum
Unit
Measurement
conditions
Input LED forward voltage
V_F
Reverse current
I_R
Capacity between terminals
C_T
Trigger LED forward current
I_FT
Output Maximum resistance with output ON R_ON
Current leakage when the relay is open I_LEAK
Capacity between terminals
C_OFF
Capacity between I/O terminals
C_I-O
Insulation resistance
R_I-O
Turn-ON time
t_ON
Turn-OFF time
t_OFF
1.0
1.15 1.3
---
---
10
---
30
---
---
1
3
---
18
35
---
---
---
1,000
0.0008 1.0
40
---
0.8
---
---
---
---
0.4
1.0
---
0.09 1.0
V
I_F = 10 mA
μA
V_R = 5 V
pF
V = 0, f = 1 MHz
Note:
mA I_O = 120 mA
Ω
I_F = 5 mA,
I_O = 120 mA
μA
V_OFF = 400 V
pF
V = 0, f = 1MHz
pF
f = 1 MHz, Vs = 0 V
MΩ V_I-O = 500 VDC,
R_oH ≤ 60%
ms
I_F = 5 mA, R_L = 200 Ω,
ms
V_DD = 20 V (See note 2.)
2. Turn-ON and Turn-OFF
Times
IF 1
2
4 RL
VDD
3
VOUT
IF
VOUT
t ON
10%
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Minimum
Typical
Maximum
Unit
Load voltage (AC peak/DC)
V_DD
Operating LED forward current
I_F
Continuous load current (AC peak/DC) I_O
Operating temperature
T_a
---
---
5
7.5
---
---
− 20
---
320
V
25
mA
100
mA
65
°C
66
MOS FET Relays G3VM-401A/D