G3VM-61BR Datasheet, PDF (2/6 Pages) Omron Electronics LLC – MOS FET Relays

■ Absolute Maximum Ratings (Ta = 25°C)
Item
Symbol Rating
Unit Measurement Conditions
Input
LED forward current
I_F
30
Repetitive peak LED forward I_FP
1
current
LED forward current reduction Δ I_F/°C −0.3
rate
mA
A
100 μs pulses, 100 pps
mA/°C T_a ≥ 25°C
Note:
LED reverse voltage
Connection temperature
Output Load voltage (AC peak/DC)
Continuous load current
ON current reduction rate
Connection temperature
Dielectric strength between input and
output (See note 1.)
V_R
5
T_j
125
V_OFF
60
I_O
2,500
Δ I_ON/°C −22
T_j
125
V_I-O
2,500
V
°C
V
mA
mA/°C T_a ≥ 25°C
°C
V_rms
AC for 1 min
Operating temperature
Storage temperature
Soldering temperature (10 s)
T_a
−20 to +85 °C
T_stg
−40 to +125 °C
---
260
°C
With no icing or condensation
With no icing or condensation
10 s
1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
■ Electrical Characteristics (Ta = 25°C)
Item
Symbol
Mini-
mum
Typical
Maxi-
mum
Unit
Measurement
conditions
Input LED forward voltage
V_F
Reverse current
I_R
Capacity between terminals
C_T
Trigger LED forward current
I_FT
Output Maximum resistance with output ON R_ON
Current leakage when the relay is open I_LEAK
Capacity between terminals
C_OFF
Capacity between I/O terminals
C_I-O
Insulation resistance
R_I-O
Turn-ON time
t_ON
Turn-OFF time
t_OFF
1.18
---
---
---
---
---
---
---
1,000
1.33
---
70
1.0
0.065
1.0
400
0.8
---
1.48
10
---
3
0.1
10
600
---
---
---
1.0
1.5
---
0.2
0.4
V
I_F = 10 mA
μA
V_R = 5 V
pF V = 0, f = 1 MHz
mA I_O = 1 A
Ω
I_F = 10 mA, I_O = 2 A
nA
V_OFF = 60 V
pF V = 0, f = 1MHz
pF
f = 1 MHz, V_s = 0 V
MΩ V_I-O = 500 VDC,
R_oH ≤ 60%
ms
I_F = 10 mA, R_L = 200 Ω,
ms
V_DD = 20 V (See note 2.)
Note:
2. Turn-ON and Turn-OFF
Times
IF 1
2
6 RL
VDD
4
VOUT
IF
VOUT
t ON
10%
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Load voltage (AC peak/DC)
V_DD
Operating LED forward current
I_F
Continuous load current (AC peak/DC) I_O
Operating temperature
T_a
Minimum
---
10
---
25
Typical
---
---
---
---
Maximum
Unit
48
V
20
mA
2,500
mA
60
°C
20
MOS FET Relays G3VM-61BR/ER