G3VM-352C Datasheet, PDF (2/6 Pages) Omron Electronics LLC – MOS FET Relays

■ Absolute Maximum Ratings (Ta = 25°C)
Item
Symbol Rating Unit
Input LED forward current
I_F
50
mA
Repetitive peak LED
I_FP
1
A
forward current
LED forward current
reduction rate
Δ I_F/°C −0.5
mA/°C
LED reverse voltage
V_R
5
V
Connection temperature
T_j
125
°C
Output Load voltage (AC peak/DC) V_OFF 350
V
Continuous load current
I_O
120
mA
ON current reduction rate
Δ I_ON/°C −1.2
mA/°C
Connection temperature
T_j
125
°C
Dielectric strength between input and V_I-O
2,500
V_rms
output (See note 1.)
Operating temperature
T_a
−40 to +85 °C
Storage temperature
T_stg
−55 to +125 °C
Soldering temperature (10 s)
---
260
°C
Measurement conditions
100 μs pulses, 100 pps
Note:
Ta ≥ 25°C
Ta ≥ 25°C
AC for 1 min
With no icing or condensation
With no icing or condensation
10 s
1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
■ Electrical Characteristics (Ta = 25°C)
Item
Input LED forward voltage
Reverse current
Capacity between terminals
Trigger LED forward current
Output Maximum resistance with output ON
Symbol
Mini-
mum
V_F
1.0
I_R
---
C_T
---
I_FT
---
R_ON
---
---
Current leakage when the relay is open I_LEAK
Capacity between terminals
C_OFF
Capacity between I/O terminals
C_I-O
Insulation resistance
R_I-O
Turn-ON time
t_ON
Turn-OFF time
t_OFF
---
---
---
1,000
---
---
Typical
Maxi-
mum
1.15 1.3
---
10
30
---
1
3
25
35
35
50
0.0015 1.0
30
---
0.8
---
---
---
0.3
1.0
0.1
1.0
Unit
V
μA
pF
mA
Ω
Ω
μA
pF
pF
MΩ
ms
ms
Measurement
conditions
I_F = 10 mA
V_R = 5 V
V = 0, f = 1 MHz
I_O = 120 mA
I_F = 5 mA,
I_O = 120 mA, t < 1 s
I_F = 5 mA,
I_O = 120 mA
V_OFF = 350 V
V = 0, f = 1MHz,
f = 1 MHz, V_s = 0 V
V_I-O = 500 VDC,
R_oH ≤ 60%
I_F = 5 mA, R_L = 200 Ω,
V_DD = 20 V (See note 2.)
Note:
2. Turn-ON and Turn-OFF
Times
IF 1
2
8 RL
VDD
7
VOUT
IF
VOUT
t ON
10%
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Load voltage (AC peak/DC)
V_DD
Operating LED forward current
I_F
Continuous load current (AC peak/DC) I_O
Operating temperature
T_a
Minimum
---
5
---
− 20
Typical
---
7.5
---
---
Maximum
280
25
100
65
Unit
V
mA
mA
°C
48
MOS FET Relays G3VM-352C/F