G3VM-351G1 Datasheet, PDF (2/6 Pages) Omron Electronics LLC – MOS FET Relays

■ Absolute Maximum Ratings (T_a = 25°C)
Item
Symbol Rating Unit
Input LED forward current
I_F
50
mA
Repetitive peak LED
I_FP
1
A
forward current
LED forward current
reduction rate
Δ I_F/°C −0.5
mA/°C
LED reverse voltage
V_R
5
V
Connection temperature T_j
125
°C
Output Load voltage (AC peak/DC) V_OFF 350
V
Continuous load current I_O
100
mA
(AC peak/DC)
ON current reduction rate Δ I_O/°C −1.0
mA/°C
Connection temperature T_ϕ
125
°C
Dielectric strength between input and V_I-O
1,500
V_rms
output (See note 1.)
Operating temperature
T_a
−40 to +85 °C
Storage temperature
T_stg
−55 to +125 °C
Soldering temperature (10 s)
---
260
°C
Measurement Conditions
100 μs pulses, 100 pps
Note:
T_a ≥ 25°C
T_a ≥ 25°C
AC for 1 min
With no icing or condensation
With no icing or condensation
10 s
1. The dielectric strength between the input
and output was checked by applying voltage
between all pins as a group on the LED side
and all pins as a group on the light-receiving
side.
■ Electrical Characteristics (T_a = 25°C)
Item
Symbol
Mini-
mum
Input LED forward voltage
V_F
1.0
Reverse current
I_R
---
Capacity between terminals
C_T
---
Trigger LED forward current
I_FT
---
Output Maximum resistance with output ON R_ON
---
---
Current leakage when the relay is open I_LEAK
Capacity between terminals
C_OFF
Capacity between I/O terminals
C_I-O
Insulation resistance
R_I-O
Turn-ON time
t_ON
Turn-OFF time
t_OFF
---
---
---
1,000
---
---
Typical
Maxi-
mum
1.15 1.3
---
10
30
---
0.4
1
25
35
35
50
1
1000
35
---
0.8
---
---
---
1
5
1
3
Unit
V
μA
pF
mA
Ω
Ω
nA
pF
pF
MΩ
ms
ms
Measurement
conditions
I_F = 10 mA
V_R = 5 V
V = 0, f = 1 MHz
I_O = 100 mA
I_F = 2 mA,
I_O = 100 mA, t < 1 s
I_F = 2 mA,
I_O = 100 mA
V_OFF = 350 V
V = 0, f = 1MHz
f = 1 MHz, V_s = 0 V
V_I-O = 500 VDC,
R_oH ≤ 60%
I_F = 2 mA, R_L = 200 Ω,
V_DD = 20 V (See note 2.)
Note:
2. Turn-ON and Turn-OFF
Times
IF 1
2
4 RL
VDD
3
VOUT
IF
VOUT
t ON
10%
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Load voltage (AC peak/DC)
V_DD
Operating LED forward current
I_F
Continuous load current (AC peak/DC) I_O
Operating temperature
T_a
Minimum
---
---
---
− 20
Typical
---
2
---
---
Maximum
Unit
280
V
25
mA
80
mA
65
°C
182
MOS FET Relays G3VM-351G1