G3VM-2L Datasheet, PDF (2/6 Pages) Omron Electronics LLC – MOS FET Relays

■ Absolute Maximum Ratings (Ta = 25°C)
Item
Symbol Rating
Unit
LED forward current
I_F
50
mA
Repetitive peak LED forward
current
I_FP
1
A
Input
LED forward current reduction
rate
Δ I_F/°C
−0.5
mA/°C
LED reverse voltage
Connection temperature
Load voltage (AC peak/DC)
Continuous load current
Output
ON current reduction rate
Connection temperature
Dielectric strength between input and
output (See note 1.)
V_R
6
T_j
125
V_OFF
350
I_O
120
Δ I_ON/°C −1.2
T_j
125
V_I-O
2,500
V
°C
V
mA
mA/°C
°C
V_rms
Operating temperature
Storage temperature
Soldering temperature (10 s)
T_a
−40 to +85 °C
T_stg
−55 to +125 °C
---
260
°C
Measurement conditions
100 μs pulses, 100 pps
Note:
Ta ≥ 25°C
Ta ≥ 25°C
AC for 1 min
With no icing or condensation
With no icing or condensation
10 s
1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
■ Electrical Characteristics (Ta = 25°C)
Item
Symbol
Mini-
mum
Typical
Maxi-
mum
Unit
Measurement
conditions
Input LED forward voltage
V_F
1.0
1.15 1.3
V
I_F = 10 mA
Note:
Reverse current
I_R
---
---
10
μA
V_R = 6 V
Capacity between terminals
C_T
---
30
---
pF
V = 0, f = 1 MHz
Trigger LED forward current
I_FT
---
1
3
mA I_O = 120 mA
Output Maximum resistance with output ON R_ON
---
22
35
Ω
I_F = 5 mA,
I_O = 120 mA
Current leakage when the relay is open I_LEAK
---
0.0005 1.0
μA
V_OFF = 350 V
Capacity between terminals
C_OFF
---
40
---
pF
V = 0, f = 1MHz
Limit current
I_LIM
150 ---
300
mA I_F = 5 mA, V_DD = 5 V,
t = 5 ms
Capacity between I/O terminals
Insulation resistance
Turn-ON time
Turn-OFF time
C_I-O
---
0.8
---
pF
f = 1 MHz, V_s = 0 V
R_I-O
1,000 ---
---
MΩ V_I-O = 500 VDC,
R_oH ≤ 60%
t_ON
---
t_OFF
---
0.25 1.0
0.15 1.0
ms
I_F = 5 mA, R_L = 200 Ω,
ms
V_DD = 20 V (See note 2.)
2. Turn-ON and Turn-OFF
Times
1
4
Load
2
3 ^AC/DC
IF 1
2
4 RL
VDD
3
VOUT
IF
VOUT
t ON
10%
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Load voltage (AC peak/DC)
V_DD
Operating LED forward current
I_F
Continuous load current (AC peak/DC) I_O
Operating temperature
T_a
Minimum
---
5
---
− 20
Typical
---
7.5
---
---
Maximum
Unit
280
V
25
mA
100
mA
65
°C
32
MOS FET Relays G3VM-2(F)L