G3VM-201G1_10 Datasheet, PDF (2/4 Pages) Omron Electronics LLC – MOS FET Relays

■ Absolute Maximum Ratings (T_a = 25°C)
Item
Symbol Rating Unit
Input LED forward current
I_F
50
mA
Repetitive peak LED
I_FP
1
A
forward current
LED forward current
reduction rate
Δ I_F/°C −0.5
mA/°C
LED reverse voltage
V_R
5
V
Connection temperature
T_j
125
°C
Output Load voltage (AC peak/DC) V_OFF 200
V
Continuous load current
I_O
200
mA
(AC peak/DC)
ON current reduction rate
Δ I_O/°C −2.0
mA/°C
Connection temperature
T_j
125
°C
Dielectric strength between input and V_I-O
1,500
V_rms
output (See note 1.)
Operating temperature
T_a
−40 to +85 °C
Storage temperature
T_stg
−55 to +100 °C
Soldering temperature (10 s)
---
260
°C
Measurement Conditions
Note:
100 μs pulses, 100 pps
T_a ≥ 25°C
T_a ≥ 25°C
AC for 1 min
With no icing or condensation
With no icing or condensation
10 s
1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
■ Electrical Characteristics (T_a = 25°C)
Item
Symbol
Mini-
mum
Typical
Maxi-
mum
Unit
Measurement
conditions
Input LED forward voltage
V_F
1.0
1.15 1.3
V
I_F = 10 mA
Reverse current
I_R
---
---
10
μA
V_R = 5 V
Capacity between terminals
C_T
---
30
---
pF
V = 0, f = 1 MHz
Trigger LED forward current
I_FT
---
0.4
1
mA I_O = 200 mA
Output Maximum resistance with output ON R_ON
---
5
8
Ω
I_F = 2 mA,
I_O = 200 mA
Current leakage when the relay is open I_LEAK
---
1
1000 nA
V_OFF = 200 V, T_a = 25°C
Capacity between terminals
C_OFF
---
90
---
pF
V = 0, f = 1MHz
Capacity between I/O terminals
C_I-O
---
0.8
---
pF
f = 1 MHz, V_s = 0 V
Insulation resistance
R_I-O
1,000 ---
---
MΩ V_I-O = 500 VDC,
R_oH ≤ 60%
Turn-ON time
Turn-OFF time
t_ON
---
t_OFF
---
3
8
0.6
3
ms
I_F = 2 mA, R_L = 200 Ω,
ms
V_DD = 20 V (See note 2.)
Note:
2. Turn-ON and Turn-OFF
Times
IF 1
2
4 RL
VDD
3
VOUT
IF
VOUT
t ON
10%
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Load voltage (AC peak/DC)
V_DD
Operating LED forward current
I_F
Continuous load current (AC peak/DC) I_O
Operating temperature
T_a
Minimum
---
---
---
−20
Typical
---
2
---
---
Maximum
Unit
160
V
25
mA
160
mA
65
°C
166
MOS FET Relays G3VM-201G1