G3VM-101LR Datasheet, PDF (2/6 Pages) Omron Electronics LLC – MOS FET Relays

■ Absolute Maximum Ratings (Ta = 25°C)
Item
Symbol Rating Unit Measurement Conditions
Input
LED forward current
LED forward current
reduction rate
I_F
50
Δ I_F/°C −0.5
mA
mA/°C T_a ≥ 25°C
Note:
LED reverse voltage
V_R
Connection temperature T_j
Output Load voltage (AC peak/DC) V_OFF
Continuous load current
I_O
ON current reduction rate Δ I_O/°C
Connection temperature T_j
Dielectric strength between input and V_I-O
output (See note 1.)
Ambient operating temperature
T_a
Storage temperature
T_stg
Soldering temperature
---
5
125
100
80
−0.8
125
1,500
V
°C
V
mA
mA/°C
°C
V_rms
−20 to +85 °C
−40 to +125 °C
260
°C
T_a ≥ 25°C
AC for 1 min
With no icing or condensation
With no icing or condensation
10 s
1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
■ Electrical Characteristics (Ta = 25°C)
Item
Input LED forward voltage
Reverse current
Capacity between terminals
Trigger LED forward current
Output Maximum resistance with output ON
Symbol
Mini-
mum
V_F
1.0
I_R
---
C_T
---
I_FT
---
R_ON
---
Current leakage when the relay is open I_LEAK
Capacity between terminals
C_OFF
Capacity between I/O terminals
C_I-O
Insulation resistance between I/O terminals R_I-O
---
---
---
1,000
Turn-ON time
Turn-OFF time
t_ON
---
t_OFF
---
Typical
Maxi-
mum
1.15 1.3
---
10
15
---
1
5
8
14
100 200
6
8
0.6
---
---
---
0.1
0.3
0.1
0.3
Unit
V
μA
pF
mA
Ω
pA
pF
pF
MΩ
ms
ms
Measurement
conditions
I_F = 10 mA
V_R = 5 V
V = 0, f = 1 MHz
I_O = 80 mA
I_F = 10 mA,
I_O = 80 mA, t = 10 ms
V_OFF = 80 V
V = 0, f = 100 MHz,
t<1s
f = 1 MHz, V_s = 0 V
V_I-O = 500 VDC,
R_oH ≤ 60%
I_F = 5 mA, R_L = 200 Ω,
V_DD = 20 V (See note 2.)
Note:
2. Turn-ON and Turn-OFF
Times
IF 1
2
4 RL
VDD
3
VOUT
IF
VOUT
t ON
10%
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Load voltage (AC peak/DC)
V_DD
Operating LED forward current
I_F
Continuous load current (AC peak/DC) I_O
Operating temperature
T_a
Minimum
---
10
---
25
Typical
---
---
---
---
Maximum
Unit
80
V
30
mA
80
mA
60
°C
280
MOS FET Relays G3VM-101LR