G3VM-101AR Datasheet, PDF (2/4 Pages) Omron Electronics LLC – MOS FET Relays G3VM-101AR/DR

■ Absolute Maximum Ratings (Ta = 25°C)
Item
Symbol Rating
Unit Measurement conditions
Input LED forward current
I_F
30
mA
Repetitive peak LED forward I_FP
1
A
current
LED forward current
reduction rate
Δ I_F/°C −0.3
mA/°C
LED reverse voltage
V_R
5
V
Connection temperature
T_j
125
°C
Output Load voltage (AC peak/DC) V_OFF 100
V
Continuous load current
I_O
1
A
(AC peak/DC)
ON current reduction rate Δ I_ON/°C −10
mA/°C
Pulse ON current
I_OP
3
A
Connection temperature
T_j
125
°C
Dielectric strength between input and V_I-O
2,500
V_rms
output (See note 1.)
Operating temperature
T_a
−40 to +85 °C
Storage temperature
T_stg
−55 to +125 °C
Soldering temperature (10 s)
---
260
°C
100 μs pulses, 100 pps
Ta ≥ 25°C
Note:
Ta ≥ 25°C
t=100 mS, Duty = 1/10
AC for 1 min
With no icing or condensation
With no icing or condensation
10 s
1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
■ Electrical Characteristics (Ta = 25°C)
Item
Symbol Minimum Typical
Maxi-
mum
Unit
Measurement
conditions
Input LED forward voltage
V_F
Reverse current
I_R
Capacity between terminals
C_T
Trigger LED forward current
I_FT
Output Maximum resistance with output ON R_ON
Current leakage when the relay is open I_LEAK
Capacity between terminals
C_OFF
Capacity between I/O terminals
C_I-O
Insulation resistance between I/O terminals
R_I-O
Turn-ON time
t_ON
Turn-OFF time
t_OFF
1.18
---
---
---
---
---
---
---
1,000
---
---
1.33 1.48 V
---
10
μA
70
---
pF
I_F = 10 mA
V_R = 5 V
V = 0, f = 1 MHz
Note:
0.5
3
mA I_O = 1 A
250
700
mΩ I_F = 5 mA,
I_O =1 A, t < 1 s
---
1.0
μA
V_OFF = 100 V
200 ---
pF
V = 0, f = 1MHz
0.8
---
pF
f = 1 MHz, V_s = 0 V
---
---
MΩ V_I-O = 500 VDC,
R_oH ≤ 60%
0.8
5.0
ms
I_F = 5 mA, R_L = 200 Ω,
0.3
1.0
ms
V_DD = 20 V (See note 2.)
2. Turn-ON and Turn-OFF
Times
IF 1
2
4 RL
VDD
3
VOUT
IF
VOUT
t ON
10%
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Load voltage (AC peak/DC)
V_DD
Operating LED forward current
I_F
Continuous load current (AC peak/DC) I_O
Operating temperature
T_a
Minimum
---
5
---
− 20
Typical
---
10
---
---
Maximum
Unit
80
V
25
mA
1
A
65
°C
2
MOS FET Relays G3VM-101AR/DR