G2RL Datasheet, PDF (2/8 Pages) Omron Electronics LLC – PCB Relay

■ Coils Ratings for High-sensitivity Models
Rated voltage
5 VDC
12 VDC
Rated current
50.0 mA
20.8 mA
Coil resistance
100 Ω
576 Ω
Must operate voltage
75% max. of the rated voltage
Must release voltage
10% min. of the rated voltage
Max. voltage
180% of rated voltage (at 23°C)
Power consumption
Approx. 250 mW
24 VDC
10.42 mA
2,304 Ω
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
■ Contact Ratings
Item
General-purpose Models
Number of poles
1 pole
2 poles
Contact material
Ag Alloy (Cd free)
Load
Resistive load (cosφ=1)
Rated load
12 A at 250 VAC
12 A at 24 VDC
(See note.)
8 A at 250 VAC
8 A at 30 VDC
(See note.)
Rated carry current
12 A (See note.)
8 A (70°C)/5 A (85°C)
(See note.)
Max. switching voltage 440 VAC, 300 VDC
Max. switching current 12 A
8A
Max. switching power 3,000 VA (4,000 VA)
2,000 VA
High-capacity Models
High-sensitivity Models
1 pole
1 pole
16 A at 250 VAC
16 A at 30 VDC
(See note.)
16 A (See note.)
16 A
4,000 VA
10 A at 250 VAC
10 A at 24 VDC
(See note.)
10 A (See note.)
10 A
2,500 VA
Note: Contact your OMRON representative for the ratings on fully sealed models.
■ Characteristics
Item
General-purpose
(High-capacity) Models
General-purpose Models
High-sensitivity Models
Number of poles
1 pole
2 pole
1 pole
Contact resistance
100 mΩ max.
Operate (set) time
15 ms max.
Release (reset) time
5 ms max.
Max. operating frequency Mechanical:18,000 operation/hr
Electrical:1,800 operation/hr at rated load
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength
5,000 VAC, 1 min between coil and 5,000 VAC, 1 min between coil and 5,000 VAC, 1 min between coil and
contacts
contacts
contacts
1,000 VAC, 1 min between contacts 2,500 VAC, 1 min between contacts of 1,000 VAC, 1 min between contacts
of same polarity
different polarity
of same polarity
1,000 VAC, 1 min between contacts of
same polarity
Impulse withstand voltage 10 kV (1.2×50 μs) between coil and contact
Vibration resistance
Destruction:10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction:10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistance
Destruction:1,000 m/s² (approx. 100 G)
Malfunction:100 m/s² (approx. 10 G)
Endurance (Mechanical) 20,000,000 operations (at 18,000 operations/hr)
Ambient temperature
Operating:–40°C to 85°C (with no icing)
Storage:–40°C to 85°C (with no icing)
Ambient humidity
5% to 85%
Weight
Approx. 12 g
Note: Values in the above table are the initial values.
204
PCB Relay G2RL