EY3A-106-A Datasheet, PDF (2/2 Pages) Omron Electronics LLC – Single Beam Sensor (1 Beam: 65 mm)

■ Characteristics (Paper Table Glass: t = 6 mm max., Transparency Rate: 90% min.)
(Ta =0° C to 60° C)
Item
Sensing density
Non-sensing distance
Paper sensing distance
Ambient illumination
Characteristic value
Lusterless paper with an OD of 0.6 max. (sensing distance: 65 mm) (see note)
100 mm (from the top of the sensor), OD: 0.05
65 mm (from the top of the sensor)
Sunlight: 3,000 lx max., fluorescent light: 2,000 lx max.
Note: 1. The data shown are initial data.
2. Optical darkness (OD) is defined by the following formula:
OD = − log₁₀
POUT
PIN
P_IN (mW):Light power incident upon the document
P_OUT (mW):Reflected light power from the document
■ Optical Path Arrangement
100 (see note 2)
14
8 dia. (see note 1)
65 (standard value)
8.9
Paper supporting plate
Glass
Note: 1. The part with oblique lines indicates the paper sensing area of the EY3A-106-A which is practically determined by the diameter of the
beam and its tolerance.
2. The non-sensing distance of the EY3A-106-A is determined using a paper with an OD of 0.05.
■ Engineering Data
EY3A-106-A Distance Characteristics (Typical)
1.6
4.75 V
1.4
5.0 V
5.25 V
1.2
1
0.8
0.6
0.4
50
55
60
65
70
75
80
Distance (mm)
Single Beam Sensor (1 Beam: 65 mm) EY3A-106-A
131