E3Z-G61 Datasheet, PDF (2/5 Pages) Omron Electronics LLC – Grooved Design Eliminates Optical Axis Adjustment

Ratings and Specifications
E3Z-G
Number of optical axes
1
2
Item
Model
NPN output
PNP output
E3Z-G61/E3Z-G61-M3J
E3Z-G81/E3Z-G81-M3J
E3Z-G62/E3Z-G62-M3J
E3Z-G82/E3Z-G82-M3J
Sensing distance
(distance between arms of groove)
25 mm
Standard sensing object
Opaque, 1.5-mm dia. min.
Light source (wavelength)
Infrared LED (940 nm)
Power supply voltage
12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption
25 mA max.
40 mA max.
Control output
Load power supply voltage: 26.4 VDC max.
Load current: 100 mA max. (Residual voltage: 1 V max.)
Open collector output (NPN or PNP depending on model)
Light-ON/Dark-ON selectable
Protection circuits
Reversed power supply polarity protection, Output short-circuit protection, and Mutual interference pre-
vention
Response time
Operate or reset: 1 ms max.
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range
Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC between lead wires and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min between lead wires and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s² 3 times each in X, Y, and Z directions
Degree of protection
IP64 (IEC 60529)
Connection method
Pre-wired cable (standard length: 2 m and 0.5 m)/Pre-wired Connector (standard length: 300 mm)
Indicator
Operation indicator (orange)
Weight
(packed
state)
Pre-wired
(with 2-m cable)
Pre-wired Connectors
Approx. 65 g
Approx. 30 g
Material Case
ABS (Acrylonitril Butadiene Styrene)
Accessories
Instruction manual
2