E3Z-D62 Datasheet, PDF (2/15 Pages) Omron Electronics LLC – Photoelectric Sensor with Built-in Amplifier

E3Z
E3Z
J ACCESSORIES (ORDER SEPARATELY)
Slit for Through-beam Models (E3Z- Tjj)
Order a slit for each emitter and receiver.
Slit width
0.5 mm dia.
1 mm dia.
2 mm dia.
0.5×10 mm
1×10 mm
2×10 mm
Sensing distance (typical)
50 mm
200 mm
800 mm
1m
2.2 m
5m
Reflectors for Retroreflective Models
Minimum sensing object (typical)
0.5 mm dia.
1 mm dia.
2 mm dia.
0.7 mm dia.
1.2 mm dia.
2.4 mm dia.
Part number
E39-S65A
E39-S65B
E39-S65C
E39-S65D
E39-S65E
E39-S65F
Name
Reflector
Miniature Reflector
Tape Reflector
Sensing distance (typical)
100 mm to 3 m
100 mm to 4 m
100 mm to 5 m
100 mm to 2.5 m
100 mm to 3.5 m
50 mm to 1.5 m
150 mm to 700 mm
150 mm to 1.1 m
150 mm to 1.4 m
Part number
E39-R1
E39-R1S
E39-R2
E39-R9
E39-R10
E39-R3
E39-RS1
E39-RS2
E39-RS3
Note: The actual sensing distance may be reduced to approximately 70% of the typical sensing distance when using a Reflector other
than the E39-R1 or the E39-R1S.
J MOUNTING BRACKETS
Appearance
Description
L-bracket, horizontal
Part
number
E39-L104
Appearance
Description
Compact vertical
protective cover bracket
Part
number
E39-L142
L-bracket, vertical
E39-L44
Open top,
20° angle adjustability
E39-L43
Vertical protective cover
bracket
E39-L98
Protected top
5° angle adjustability
E39-L144
Note: If a through-beam model is used, order two Mounting Brackets — one for the emitter and one for the receiver.
3