E3SCR62C Datasheet, PDF (2/7 Pages) Omron Electronics LLC – Ideal for Detecting Transparent Glass and Plastic Containers

E3S-CR62/67
Sensor I/O Connectors (M12) (Refer to Dimensions on XS2)
Cable
Standard cable
Appearance
Straight
L-shape
Cable type
2m
5m
3-wire
2m
5m
Model
XS2F-D421-DC0-A
XS2F-D421-GC0-A
XS2F-D422-DC0-A
XS2F-D422-GC0-A
Note: For details on Sensor I/O Connectors and cables such as vibration-proof robot cables, refer to Introduction to Sensor I/O Connectors.
Ratings and Specifications
Sensor type
Retro-reflective Models (M.S.R. function)
Item
Model
E3S-CR62
E3S-CR67
Sensing distance
250 mm (When using the E39-R6), 1 m (250 mm)*1 (When using the E39-R1)
Standard sensing object 30-mm dia. × 150 mm glass tube (thickness: 1.8 mm)
Directional angle
2 to 6°
Light source (wavelength) Red LED (650 nm)
Power supply voltage
10 to 30 VDC, ripple (p-p): 10% max.
Current consumption
40 mA max.
Control output
Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: NPN output 1.2 V max.,
PNP output 2 V max.), Open collector model (NPN/PNP selectable), Light-ON / Dark-ON selectable
Protection circuits
Load short-circuit protection, Reverse polarity protection, Mutual interference prevention
Response time
Operate or reset: 1 ms max.
Sensitivity adjustment
2-turn endless adjuster (with indicator)
Ambient illuminance
(Receiver side)
Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max.
Ambient temperature range Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1,000 VAC at 50/60 Hz for 1 minute
Vibration resistance
Shock resistance
Destruction: 10 to 2,000 Hz,1.5-mm double amplitude or 300 m/s² for 0.5 hrs each in X, Y, and Z directions
Destruction: 1000 m/s² 3 times each in X, Y, and Z directions
Degree of protection
IEC 529 IP67 (in-house standards: oil-resistant)
NEMA 6P (restricted to indoor use) *2
IEC 529 IP67
NEMA 6P (restricted to indoor use) *2
Connection method
Pre-wired (standard length: 2 m)
Standard connector
Weight (packed state)
Approx. 115 g
Approx. 80 g
Case
Zinc die-cast
Lens
Methacrylic resin
Material
Display
operation panel
Mounting
Brackets
Polyethyl sulfon
Stainless steel (SUS304)
Accessories
Clamps (with screws), Adjustment driver, Instruction manual, Reflective Plate
*1. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. NEMA (National Electrical Manufacturers Association) Standard
2